#carjumpstart

The idea of jump starting our car might be frightening for many of us. Although the procedure is simple, it can be hazardous if done incorrectly. If your car suddenly stops in Surrey, you can connect with experts of car jump start in Surrey. The correct methods for jump-starting your car safely are as follows, after making sure that you or your vehicle possesses jumper cables:

 Ways you can jumpstart your car

1. Find your battery's location first. Check the position of your battery by opening the hood. Please refer to your owner's manual if you are unsure of its whereabouts. It's crucial to locate the battery in the vehicle delivering the jump so that it may be positioned correctly next to yours.

2. Put the car that will be the jump in the right position. Nothing is more annoying than trying to jump a car that is in the incorrect place and out of reach of your jumper wires. The car should be parked so that the jumper wires may easily reach the batteries of both vehicles. Both of your automobiles' hoods should be opened, and they should be fastened so they won't close. Make sure to turn off the vehicle delivering the leap.

3. Hook up the cords. Clamp the jumper cables' one end to the car's battery that is delivering the jump. Red denotes positive and black is negative on the cables. Before connecting the black clamp to the battery's black post, connect the red clamp to the battery's red post. Be careful not to let the metal clamps on the opposite end touch one another as you do this. If they do, a potentially harmful electrical spark can result.

4. Start the car that is delivering the jump's engine. After charging the dead battery for six to ten minutes, turn off the engine.

5. Turn on your vehicle. Check to check if your automobile will start by turning the key in the ignition. If so, proceed to the next step.

6. Removing the clamp. Remove the red clamp first, then the black clamp, from the vehicle supplying the jump. Once more, avoid letting any clamps touch. In the same order—black, then red—remove the clamps from your car.

7. Attach the cords to the battery of your car. Check once more to be sure that no clamps are in contact with one another. The red clamp should be connected to the battery's red post. Connect the black clamp to the black post on your battery or to the metal of your car. It can lessen the possibility of a spark being produced near the battery by connecting the black clamp to your engine rather than the battery post.

Batterymela is a top and well known battery services provider at hadapsar ,pune ,we provide immediate battery services at your doorstep.