Some access points (often called routers or hubs) feature a "WPS" automatic link button that stands for Wi-Fi Protected Setup and enables devices to connect to your network without entering a password. This is the simplest way to connect your canon.com/ijsetup printer, so kindly pick ' WPS Connection Method ' for guidance on how to connect using this technique if your access point has a WPS button below.

You can scan pictures and records on your desktop running on Windows or Mac using the canon.com/ijsetup. The utility saves the scanned information to a preset folder automatically and enables you to browse through your computer's folders, extract text from documents, and add files to an email.

Please check that you fulfill the following two requirements before trying to link your canon.com/ijsetup printer to your wireless network:

Ensure that you have an Internet connection point (sometimes referred to as a router or hub). Before you go to the next step, your access point must be completely functional.

Make sure you have a computer device such as a PC, Mac, Tablet or Smartphone, hereafter referred to as a laptop that is attached to the Internet effectively.

To confirm that the computer to be used with the printer is connected to the network, try browsing a computer-based website, such as canon.com/ijsetup. If the webpage is not displayed, you will not be linked to the Internet effectively and this must be resolved before proceeding.

If you have issues or are not sure how to set up your access point or internet connection, please refer to your Internet Service Provider (ISP) instruction manual for the access point you are using.

Some Method to Setup Canon Printer From Canon.com/ijsetup

First One is WPS Connection Method:

There are conditions to be encountered before we begin to use the push-button technique of WPS:

A physical WPS push button must be accessible for the access point to canon.com/ijsetup. Please search for information with the user manual for your device. Please use the directions in the Standard Connection Method section if the WPS push button is not accessible.

The WPA (Wi-Fi Protected Access) or WPA2 safety protocol must be used by your network. Most access points enabled by WPS use this protocol

Make sure you turn on the printer.

Press and hold the [ Wi-Fi ] button at the top of the printer until the orange alarm lamp flashes and releases it once.

Make sure the Wi-Fi button begins to flash red and then click the [ WPS ] button within 2 minutes to your access point.

Please refer to the Access Point Manual for precise information about clicking the WPS button.

While looking for or linking to the access point, the blue Wi-Fi lamp on the printer will proceed flash. The green power lamp will also begin flashing during installation. The red and red lights will stop flashing and stay lit when the printer has effectively connected to your wireless network to canon.com/ijsetup.

To verify a successful connection of your printer to your wireless network, you can print out your printer's network configurations if you want:

Make sure you turn on your printer.

Load a simple paper sheet of A4 or letter size.

Press and hold the [ Cancel ] button until 15 flashes of the orange alarm lamp and release it. The data page for the network will be published.

Check that the "Connection" suggests "Active" when referring to the printout and that the SSID -Service Set Identifier (or your wireless network name) suggests the right wireless network name.

This concludes the procedure for setting up the WPS.

Install the software to make the most of your canon.com/ijsetup, please continue now.