#calendering machine

View On WordPress

View On WordPress

Calender Machine is to make the paper smooth and glossy for printing and writing in paper making process, so what's the influence of calender machine for paper? More details, feel free to contact us Email: [email protected]

⑴ at this point, when the paper by the mechanical drawing device automatically draw paper, the paper was dropped into the rotating roller; ⑵ calendering machine operation, the import point of the full width of the nip protection plate are not allowed to leave, if you want to remove the protective plate must be out of the calendering machine and self-locking; ⑶ When running, it is forbidden to send the paper to the calendering machine in this area. It is strictly forbidden to keep any part of the body close to the area, ⑷ operation of the calendering machine, or lift, or fall, must be notified in advance of the above operators; ⑸ is strictly prohibited in the calendering machine area of the fence or aisle railings above the stand; 6) Do not replace the scraper in operation

To prevent accidents, the work area must be kept orderly and clean. To ensure that a problem occurs, the lifting equipment should be used immediately. Do not stand or move under the suspension. Sometimes set up scaffolding can facilitate the work carried out. Determine the rigidity of scaffolding.

The biggest danger when changing rolls is caused by lifting the rollers. A roller of a large Calender machine may exceed 50 tons. Which on the upgrading of equipment and the level of the operator has a very high demand. Everyone should know the order in which the work is performed. Before you start changing rolls, you need to plan and discuss through: 1, do not move around the hanging when the move or stand. 2, before upgrading any parts, check the performance of the crane and the state of the pulley and ensure that the weight of the roller does not exceed the maximum load of the crane. 3, before the roll, the roller and its surrounding should be kept clean. Any debris or obstructions may cause danger. 4, to ensure that the rope and lift the belt load capacity is large enough, not damaged and in good condition. 5, before lifting, from the roller off all the pipes, hoses and cables. Remember to release the drive shaft, the coupling head with other equipment. 6, before the upgrade as much as possible to drain the oil. 7, connect the electrical drive to lock the security to prevent accidental start.

1, maintenance work should be maintenance personnel and the operator agreed to both sides. Maintenance personnel are being repaired, the operator did not receive notice to continue production is very dangerous. 2, maintenance personnel should use the appropriate tools. 3, in the beginning of maintenance must be implemented before the interlock and preventive measures. Interlocking can be achieved through a control room or a separate control switch. 4, the mechanical lock may move the parts.