#broken garage door

Garage Doors Burbank CA offers expert garage door repair in Burbank, including broken spring repair, garage door installation, and opener repair. We specialize in Burbank garage doors, providing fast, reliable garage repair and top Burbank garage door service. Trust Precision Door Burbank for all your garage repair Burbank needs call us on (818) 305-5224.

🚪✨ Garage Door Brentwood CA Fast, clean, and reliable garage door repair for Brentwood & all nearby areas. We handle everything your garage door needs — broken springs, damaged cables, worn rollers, noisy doors, opener issues, track problems, and full door installations. Our technicians provide same‑day service, clean workmanship, and long‑lasting results for every home we visit.

🎁 Special Offer for New Customers Get $25 OFF any garage door repair — springs, cables, rollers, openers, or off‑track doors. Limited‑time offer. Same‑day service available.

📞 (213) 224‑3335

A broken garage door can be a major inconvenience. Whether it’s stuck halfway, making strange noises, or simply refusing to open or close, it can throw off your entire routine. If you're experiencing issues with your garage door, don’t panic. There are several common problems that you may be able to fix on your own. However, in some cases, it’s best to call in a professional. In this blog, we’ll walk you through how to troubleshoot and fix a broken garage door and why calling Mike's Garage Door Repair and Service may be your best option.

Common Garage Door Problems

Before diving into how to fix a broken garage door, it’s important to identify the issue. Some common garage door problems include:

Garage Door Won’t Open or Close: This could be due to a broken spring, malfunctioning opener, or sensor misalignment.

Unusual Noises: Grinding, squealing, or popping sounds often point to issues with the springs, tracks, or rollers.

Misaligned Tracks: If the door gets stuck or jams, it could be that the tracks are bent or misaligned.

Broken Cables: A snapped cable can prevent the door from moving smoothly.

How to Fix a Broken Garage Door

If you're determined to tackle the repair yourself, here are some basic steps you can take:

Step 1: Check the Power Supply

The first thing you should do when your garage door won’t open is check the power supply. Make sure the opener is plugged in and that the circuit breaker hasn't been tripped. If your opener uses batteries, ensure they’re still functional.

Step 2: Inspect the Springs

A broken garage door spring is one of the most common causes of a malfunctioning door. There are two types of springs: torsion and extension. Torsion springs are located above the door and should not be tampered with unless you have experience, as they are under high tension. Extension springs run along the sides of the door. If you notice that one of the springs is visibly broken, it may need replacement.

Warning: Handling broken springs is dangerous. If you’re unsure, don’t attempt to fix them yourself.

Step 3: Check the Sensors

Garage doors have safety sensors that prevent the door from closing if something is in the way. If your door won’t close, check the sensors to make sure they’re aligned and free from obstructions. Clean the lenses with a soft cloth and make sure both sensors are facing each other.

Step 4: Inspect the Tracks

Misaligned or damaged tracks can also be the cause of a broken garage door. Look along the tracks to see if they’re bent or clogged with debris. If the tracks are misaligned, use a rubber mallet to gently tap them back into place. Make sure they’re properly lubricated and free from dirt.

Step 5: Tighten the Hardware

Sometimes, a loose bolt or screw can cause your garage door to malfunction. Check all the hardware and tighten any loose fasteners on the tracks, springs, and rollers.

Step 6: Lubricate Moving Parts

Lubrication is key to keeping your garage door operating smoothly. Apply garage door lubricant to the springs, tracks, and rollers. Avoid using WD-40 as it can attract dirt and grime, which may cause more issues in the long run.

When to Call a Professional

While some minor repairs can be done on your own, others require professional expertise. If your door is stuck, making loud noises, or if you notice a broken spring or cable, it’s best to call a professional. The professionals at Mike's Garage Door Repair and Service are trained to handle these complex repairs and will ensure the safety and functionality of your garage door.

Why Choose Mike’s Garage Door Repair and Service?

At Mike’s Garage Door Repair and Service, we specialize in fixing all types of garage door problems. With over 20 years of experience, our expert technicians can diagnose the issue and offer effective, lasting solutions. We provide reliable, affordable, and efficient service to ensure your garage door is functioning perfectly.

If you're struggling with a broken garage door, don’t wait—contact Mike’s Garage Door Repair and Service today for fast, expert repairs. Visit our website at Mike’s Garage Door Repair and Service to learn more.

A garage door is more than just an entryway—it's an essential part of your home’s security and convenience. When it breaks down, it can disrupt your daily routine and leave your home vulnerable. Fortunately, fixing a broken garage door is often manageable with the right tools and knowledge. In this blog, we’ll walk you through common issues and how to address them safely.

Common Garage Door Problems

Door Won’t Open or Close One of the most common problems homeowners face is a garage door that won't budge. This could be due to a variety of issues such as a power outage, dead remote batteries, or a malfunctioning opener.

Noisy Operation If your garage door is making loud screeching or grinding noises, it’s likely due to worn rollers, loose hardware, or lack of lubrication.

Broken Springs Springs are under immense tension and are crucial for lifting the heavy garage door. If a spring breaks, the door may become very difficult—or impossible—to lift manually.

Misaligned Tracks If the tracks are bent or not properly aligned, the door may not open smoothly. This can also put strain on the opener.

Sensor Issues Modern garage doors come with safety sensors. If these sensors are misaligned or blocked, the door might not close.

Step-by-Step Fixes

1. Check the Power and Remote Start with the basics. Make sure the opener is plugged in and the circuit breaker hasn’t tripped. Replace the batteries in your remote and try again.

2. Lubricate Moving Parts A noisy door often just needs some lubrication. Use a silicone-based garage door lubricant on the rollers, hinges, and tracks. Avoid using grease, which can attract dust.

3. Inspect and Tighten Hardware Over time, bolts and screws can loosen with regular use. Use a socket wrench to tighten any loose hardware, especially on the door tracks.

4. Align the Tracks Check the vertical tracks on either side of the door. If they’re out of alignment, loosen the screws that hold the track brackets, gently tap the tracks back into position, and retighten the screws.

5. Replace or Adjust Springs (Use Caution) Torsion and extension springs are dangerous to handle without proper tools and training. If you suspect a broken spring, it’s best to call a professional. DIY replacement can lead to serious injury.

6. Reset or Align Sensors Wipe the sensor lenses with a clean cloth. If the sensors are misaligned, adjust them so that their LED lights are steady and not blinking. Most sensors have an indicator to help with alignment.

When to Call a Professional

While basic maintenance and troubleshooting can fix many garage door issues, certain problems—like broken springs or motor malfunctions—should be handled by trained professionals. Not only can they perform the repair safely, but they also ensure your door operates correctly for years to come.

Final Thoughts

A malfunctioning garage door can be incredibly frustrating and inconvenient. Whether it’s not opening, closing, or making strange noises, a broken garage door can disrupt your daily routine. Fortunately, many common garage door issues can be fixed with a little troubleshooting and some basic tools. In this blog, we’ll guide you through the steps to fix a broken garage door, helping you restore its functionality without breaking the bank.

Common Garage Door Issues

Before diving into repairs, it’s essential to identify the problem. Here are a few common issues you might encounter:

The Door Won't Open or Close: This could signify a power issue, remote malfunction, or a problem with the garage door opener.

Noisy Operation: If your garage door sounds like it’s groaning or grinding, it might need lubrication or have worn-out components.

Misaligned Tracks: If the door moves unevenly or comes off the tracks, alignment will need to be addressed.

Broken Springs or Cables: If the door is heavy and won’t budge, you may have broken springs, which are under high tension and can be dangerous.

Step-by-Step Guide to Fixing Your Garage Door

1. Safety First

Before you start any repairs, ensure the power to the garage door opener is disconnected. This prevents accidental opening or closing while you work. Always prioritize safety—if you are unsure about any repair, it’s wise to call a professional.

2. Troubleshooting Issues

A. The Door Won't Open or Close

Check Power Supply: Ensure the garage door opener is plugged in and that there is power to the outlet. If it runs on batteries, consider replacing them.

Remote Control: Try using the wall switch instead of the remote. If it works from the switch, the remote may need new batteries or reprogramming.

Sensors: Inspect the safety sensors at the bottom of the tracks. They should be aligned and free of dirt or obstructions.

B. Noisy Operation

Lubricate the Mechanisms: Apply a silicone-based lubricant to the hinges, rollers, and tracks. This can significantly reduce noise levels.

Tighten Loose Hardware: Over time, screws and bolts can become loose. Use a wrench to tighten them up.

C. Misaligned Tracks

Inspect the Tracks: Look for any bends or obstructions. Clean the tracks with a damp cloth to remove dirt.

Realign the Door: If the door has come off the tracks, gently lift it back into position. You may need to adjust the track mounts for proper alignment.

D. Broken Springs or Cables

Identify the Problem: If the door is heavy and hard to lift manually, the springs may be broken. This is a complex and dangerous issue.

Call a Professional: For broken springs or cables, it’s best to contact a garage door repair expert. Attempting to fix these yourself can result in injury.

3. Routine Maintenance Tips

To prevent future breakages and ensure your garage door operates smoothly, consider implementing the following maintenance measures:

Regular Inspections: Check your garage door for any signs of wear every few months.

Lubricate Moving Parts: Every six months, apply a lubricant to ensure smooth operation.

Test the Safety Features: Regularly check that the door reverses when it encounters an obstacle.

Conclusion

Fixing a broken garage door doesn’t have to be a daunting task. By understanding common issues and following these troubleshooting steps, you can save time and money on repairs. Remember to keep safety as your top priority and to consult a professional when dealing with complex problems. With a little effort, your garage door can be back to its efficient self in no time!

Don’t ignore small garage door problems that could lead to expensive repairs. Titan Garage Doors Quad Cities is offering 10% off garage door repair Moline services to keep your door in peak condition. Whether it’s a minor issue or a more serious malfunction, our experienced technicians can quickly diagnose and fix the problem, ensuring your garage door operates smoothly and efficiently. Regular maintenance and timely repairs can save you from larger, more costly issues down the road.