#adjustable height workbench

Original Source: https://laboratoryquipment.blogspot.com/2020/10/how-do-i-make-adjustable-workbench.html

Workbenches are  primary workspace tools that find extensive applications everywhere from your  home to offices, company, clean rooms, Laboratory Supplies,  and many more. You must have come across many specifications and benefits of  tailor-made benches that manufacturers swear by but through this article we  would want to ask whether you are comfortable with the table you work on.  Does your backache because of inappropriate table dimensions? Does your table  provide the flexibility to readjust according to the requirements? If not, we  want you to sit back and find the best solutions to your problem.

The need for a flexible table at work

Not all areas  are spacious enough to accommodate multiple benches of varying dimensions and  design to suit particular needs. Most people prefer such worktables that can  be adjusted time and again according to the nature of work. Moreover, this  idea is ergonomic, cost-friendly, and provides enhanced efficiency at  workstations. So if you have been thinking of renovating ideas, customize one  for yourself to get the best fit.

What would be required to build an  adjustable workbench height?

While redesigning  one for yourself, you would need elementary commodities to start.

·          Blueprint  of the table design

·          Plywood

·          Benchtop  laminating sheet

·          Screws

·          Rigid  tie connectors

·          Working  tools like Chisel, hammers, glue, table saw

·          Locking  casters

Common adjustments that need to be done

The  adjustability of your table top height would save you from backaches and  strain build-up. Have you noticed that your workbench is either too low for  some task or too high for others? You can try the following to make  adjustments to your furniture.

Design Overview: Create a blueprint  for the kind of bench you require. Understand how high or low do you want  your table to be and create a reinforced frame with a lower section that can  slide over the top. You can also add bottom shelves to the design or  customize to build in extra shelves and drawers. Plan according to the budget  and space available. It is suggested to keep the width and length the same as  the original one to minimize the number of cuts.

Cut the plywood to its length: Take the appropriate measurements  and rip the plywood sheet into parts to trim it to a suitable size. You will  need the wood sheet for creating bottom and top lengthwise support, section  lengths, width wise support system, and caster locks for the legs.

Assemble the frame: After you have trimmed the lumber into desired  sizes, you have to assemble the parts and build the framework of the table.  Connector ties would be required to strengthen bolted joints and resist sheer  uplift. Use a screwdriver to fix in the screws and add support lengthwise and  width wise. If required, use a spare piece of sheet to ensure that adjacent  sides line up to the same height.

Add the bottom support: It is better to pay detailed  attention to the leg support. For a good workbench table, it should have a  strong framework system to avoid rocking or swaying movements while working.  To build an Adjustable  height Workbench, fix the lower wooden support on all four sides just  a little above the bottom of the leg with the help of Simpson ties and  screws. Here, you can also construct an under table shelf for extra storage.  For that, you would need the ply sheet of the correct dimension to be fixed  above this frame.

Insert the slide: There are various ways in which you can  build the slide to get the desired height for your table. Either add wooden  slide support adjusted with screws and slide channel to create a smooth flow  using torsion-box or generate a drill supported slide with trailer jacks,  steel rods, and a handle. Take a steel rod of the same width as the handle  and place it in such a way that it runs up from the top to the other side. A  jack attached to a handle is used to create a slide.

Add in the casters: Casters are optional though adds  mobility to your bench. You can shift the table to another location according  to your work convenience. It also adds to the overall bench height.

Original Source: https://laboratoryquipment.blogspot.com/2020/08/need-of-adjustable-height-workbenches.html

For 7 years Tinni is working in a private organization and since then she is sitting in this same desk. But recently, she is facing some difficulties while working in sitting position. She feels a severe pain on her back. Sometimes, she stands up and tries to work. But the desk is too low to her. She is quite tall. At times she takes a stroll on the floor for few minutes and comes back to her desk. But she observes one thing that her colleagues do not like this. They are working hard at the same type of workstations and only she is complaining, wandering on the floor. She takes leave often due to her back pain.  That day her boss called her and asked about her work pressure, pending works. And he also said if she is free, he can assign more work to her. Tinni cannot reply that user-friendly workstations are very much required in this office. If adjustable height workbenches were there in this office, she could work comfortably. It is a private company, Boss!

What is An Adjustable Height Workbench?

Adjustable height workbench has the flexibility of either sitting or standing while working. Based on two factors these are made. Comfort of the users and size and weight of the object they will be keeping on that bench. Now you won’t have to keep two types of separate workbenches for jobs that these are for standing and those are for sitting. Height adjustable workbench has the changeability. So, both types of tasks can be handled with it. This type of workbench is useful when many people use the same workstation. People can adjust its height according to their convenience. Height adjustable workbench allows the users to adapt to their workload.  For shift-based work it is a perfect workstation. This sit and draw workbench can be used at home, office

How does this workbench work?

Height adjustable table can be adjusted in various heights by using three different mechanisms. Options are:

Allen key height adjustment mechanism – By loosening screws at intervals down the edge of bench legs, height is adjusted and again tightening them new level is kept firmly.  

Adjustment via a manual hand crank- By rotating the hand crank clockwise and anti-clockwise its height can be raised and lowered.

Use of electric motor – By pressing accessible up and down button its desired height can be adjusted. It is the easiest way to change the height of workbench.  

Types of height adjustable workbench

There are various types of adjustable height workbenches like heavy duty, modular and ESD.

Heavy Duty- Heavy duty height adjustable workbench is made for long lasting usage. Steel is used throughout the workstation to make it durable equipment for industrial purpose. It can take many abuses because of its strength and durability. This workstation is designed for any demanding production or engineering environment.

Modular –These motorized height adjustable workbench accommodates various requirements of multiple shifts and multi-task functions. Mobility of this workstation makes it accessible to numerous work areas. This workbench is available in various color and material such as fabric, wood, glass and metal. This workstation will definitely impress your clients.

ESD (Electrostatic discharge) – Electronics industry most importantly requires ESD protection. This workbench is adjusted automatically. This workstation is required for production of electronics, repairing testing and other electronics related work.  ESD workbench provides the static electricity guidance. Strong cold steel is used as his material. Its design can improve production. Its permanent properties are laminate top and ESD powder coating. The table top of this workstation is made static dissipative and fireproof to prevent sudden discharge. This workbench includes Shelves and metalwork.

Benefits of Adjustable height workbench

A sit-stand, Tables & Workstations may cost more than traditional workstation but considering the long term health benefits of employees now offices and industries should be equipped with adjustable desks. Standing between work hours will bring the following health benefits:

·         improves blood flow and burn calories

·         reduces lower back pain

·         improves energy level

·         increases metabolism

·         reduces risk of obesity

What are the best adjustable height workbenches?

Ergtron Workfit –D, ApexDesk Elite 71, Vertdesk VI, Stand up Crank Desk, S Standup Electric Desk have been chosen as the best models of sit-stand workstations in the year 2020.

Before understanding the benefits of adjustable height workbench, it is important to understand what the uses of the same are. So talking about it adjustable height workbench is designed in a way that can be adjusted and made appropriate as per our needs and requirement. Moreover, they provide a specific work area and also a proper working area for the office. The work done using this is also very efficient and so they are considered to be an important part of the office. So now we will be discussing the benefits of the adjustable height workbench along with the reasons to clear out things.

Improving blood flow and burning out the calories: When we talk, about the blood flow, it is important to keep in mind that sitting in just in portion and not moving the body, the blood flow becomes stagnant. Hence, the need of getting up and moving the body becomes important. Getting up or standing and working can help increase the blood flow. So the need to use this type of workbench becomes important. Also, these workbenches often helps in reducing the calories. Whenever the people keep sitting at their places working for long hours it is observed that they put on weight. So due to this reason, they get a lot of diseases related to obesity and their health condition gets spoiled. So to overcome this problem and burn out the calories this workbench can help in working by standing as well as help in moving the body so this becomes easy.

Unique design: these workbenches are designed in a way to comfort the employees using this. Actually, what happens is that for prolonged sitting our body and mind start feeling the burden. So that is the time when these workbenches help the people to relax. By just lifting the lifts and adjusting it as per our needs and requirements, we can easily shift the height of these workbenches. So after a long time when we keep sitting and the back starts paining, we can easily switch to the standing mode by just simply adjusting the workbench at a height. This can also reduce down the backaches and all. Also, its application is easier to use and thus it becomes very easy for the people to just adjust using the lifts available and easily adjust it.

Reduction in the levels of the back pain: often we feel the back pain due to the bad sitting postures. So by moving our body in some movement and also increasing the blood flow of the body helps in releasing our back pain. The scientific reason behind this is that sometimes our body continuously sitting in one posture feels that the blocking of the muscles. Also, the stiffness might arise due to continuously sitting in one posture. When such situations occur the body has to go through several stresses to bring back the body in the normal position. So to avoid these situations it is important to keep moving the body and hence a movement in the body ensures the proper blood flow in the body. This will help the body to relax and hence the body does not feel any pain or problem. Sometimes, some severe back problems may arise so to overcome them this is best for the working places.

Helps in improving the energy levels at the work: often the concentration at the work is important. The concentration can be well maintained when the blood flow in the body is normal and the body functions accurately. The body is out of stress and any tensions and the body mechanism work systematically. so that is the energy levels of the body start rising up and hence the body works with more enthusiasm and energy. The energy levels are always maintained in the body by the blood flo2w and the stress. When the body is not under any stress condition, the body feels relaxed and hence can work more easily and efficiently. So the energy levels of the body are at a high peak and we get the maximum output.

Original Source: https://laboratoryquipment.blogspot.com/2020/06/how-to-choose-best-laboratory-workbench.html

Simply known as a lab bench, it is a laboratory workbench that is a worktable that offers the space and surface to conduct tests as well as procedures, provide storage for lab equipment, and create workstations for technicians as well as students in a scientific lab. Mostly, they are used in chemical and biological science labs. Inert materials such as water and fuel sources are used to make the surface generally into the bench.

Several different materials are used to build the laboratory workbench surface and it depends on the different requirements of the buyer. Various types of surface include edge-grained maple, PVC-edged laminate, electrostatic dissipative laminate (ESD), self-edged laminate, chemical resistant laminate, epoxy, and stainless steel.

How to choose a lab bench?

Cabinetry has attached with the laboratory workbench like drawers as well as shelves, which comes in various materials like its surface. Lab benches have some of the industry-related accessories such as gas valves and fume hoods, and epoxy and stainless steel sinks. Thousands of pounds ac be easily loaded by lab benches and it can also come up with wheels to rise mobility and provide ease to use.

To assist instability, the heavy-duty locking casters are attached to these wheels. The common material used in this laboratory bench is highly dense polyethylene and a wide range of wood as well as metal. Different forms of shelves are available with these lab benches such as free-standing like folding or tubular, pull out or adjustable top, and bottom.

Other laboratory benches comprise of power strips, workbench frame plugs, under-shelf lights, bin box rails, panels, footrests, overhead lights, and upright sets but they are not limited to this only. Corner adaptors, powered back guards, apron drawers, modesty panels, apron filters, and filler panels are used in building up cabinets.

To provide help in computer usage, a lab bench may also be filled with monitor holders, LAN stations, LCD holders, and keyboard trays. If it is requested, then the manufacturers can also design bench legs to adjust heights. Some lab requirements are also hold-able like no wood or usage of VOCs. Granite can be added on demand by the customer.

A wide range of customization options are available and you can customize these laboratory benches before buying. So, here is a complete guide to choosing the best laboratory Cleanroom Workbenches which is given below.

Countertop material in Workbench

The top surface of the bench is used to do a lot of tasks. A wide range of choices is available while comparing workbench tops. Here are five top-rated materials which are given below:

ESD Laminate: Also known as Electro Static Dissipative (ESD) is using a conductive layer that is unique to diffuse static electricity from workspace to protect electronics and other related sensitive devices from electric charges. It is a perfect option for the semiconductor manufacturing industry.

Brand Laminate: It is durable; wears as well as impact-resistant material. It can be used in a different range of industries.

Phenolic Resin: It is similar to that of epoxy resin countertops, Phenolic resin is light in weight and resistant to both bacteria as well as fungus and highly resistant to chemicals at a fraction of the value. These are the best pick for labs with continuous exposure to heat up to 350°F.

Stainless Steel: One of the easiest surfaces from maintenance and aesthetic point of view is stainless steel. These materials are resistant to rust, heat, corrosion, and also, nonporous at the same time. It is available in all grades and commonly used in residential areas, kitchens, clean rooms, laboratories, and manufacturing industries.

Butcher Block: These countertops are durable and easy to maintain. These are the best affordable materials and made up of wood glue along with thick slabs. The stunning grain involves a premium appearance and feels too. The surface is soft and easy on glassware. Not similar to that of laminate countertops, these blocks can be sanded and lubricated when wither burned or nicked.

Size of Workbench: The size of the workbench is another important factor that needs to be considered. Most of the laboratory range from 30 inches to 120 inches deep, 30 inches to 36 inches tall, and 24 inches to 36 inches wide. It also depends upon the space as available in the lab.

Mobile or Stationary: If the design of your lab is stationary or not changed rapidly, and then this one is the best fit for you.

Original Source: https://laboratoryquipment.blogspot.com/2020/06/5-reasons-why-people-need-adjustable.html

When users are standing at an ergonomically built workstation, efficiency is usually increased. There are also some activities benefiting from a sitting role. Adjustable height workbench gives the user the freedom to either sit or stands during their working day. This preference either is based on their comfort or is determined by certain factors such as the size and weight of the item in which they operate. This type of workbench means that for jobs that require standing, people no longer need two separate workbenches and those that require sitting.

Adjustable height workbench is flexible enough to perform all roles and everything in between. The flexibility that can be achieved is also helpful when multiple people are using the same workstation. It helps the workspace to always complement the requirements of the user and adjust to their workload making it ideal for work based on changes. Adjustable height workbench provides users with the perfect solution for the processes. Designed and manufactured to suit particular needs and requirements. The heavy-duty ergonomic design ensures not only productive but also robust and durable workstations. It gives extra benefits such as increased productivity over basic benches, and better ergonomic user position. Give increased process profits using workbenches.

The adjustable height workbench is simple and secure for height adjustment. Such workbenches are built for use in challenging assembly areas and workshops for manufacturing & packaging process use. The height-adjustable also aims to be employee-friendly and ergonomic, coupled with the efficient bench design and layout. Adjustable height workbench is becoming increasingly popular in both domestic and commercial applications. Since working with tabletops requires constant movement, tables with adjustable heights are important to have.

Here are 5 reasons why people need adjustable height workbench:

Greater Durability: The ability of individuals to withstand operational rigours should also be a reason for employing high adjustable workbenches. The surfaces of these tables are composed of chemicals and hot object resistant materials. Common materials used to make these tables are melamine and thick particle boards. Melamine protects the table from the corrosive effects that common industrial chemicals like alcohol, organic solvents, and petrol have.

Variety of Design: Not only are height adjustable workbenches durable but they also come in a wide range to choose from. People can choose among many designs and features depending on the type of use. They may also ask for custom tables for individual requirements, such as those that might fit into small spaces. They are always going to find a style that suits their tastes.

Heavyweight Capacity: Most industrial workbenches can accommodate items weighing up to 750 kg comfortably. These tables will enable people to work with heavy equipment and parts without the risk of breakage. They are designed to withstand the majority of heavy-duty machines, which their employees use every day. A maximum load of 750 kg will allow for a risk-free completion of all their manufacturing activities.

Efficiency: People want to pick industrial heavy-duty tables for their efficiency. These tables have special features, which make them easier and more reliable to work with. Electric lifts, hydraulic lift systems and manual hand crank tables are devices such as these. They can choose one that has features that people find fit for their apps. When they go out looking for the right table for their workshop or garage, make sure it has the features that will make their work easier.

Ergonomic Design: Staffs spend the rests of their time sitting at or around tables. They need to get adjustable height tables to prevent instances of strain-related injuries or accidents. The ergonomic designs of these tables are a key factor in the company's productivity since due to few stress occurrences among its employees; people will be able to ensure the production process.