Inconel 600 Flanges Manufacturers

Introduction:-

Shasan Piping Solution is a famous trader, manufacturer and exporter of WP9 Alloy Steel Pipe Fittings. This fitting should only be used with nitric acid solutions up to 0.5% concentration at room temperature. The proportion of these WP9 angle butt welded alloy steel pipe fittings increases as the sulfur dioxide content in the atmosphere increases (such as can occur in industrial areas).

Product Overview:-

In pure, air-free acids, the corrosion rate of alloy steel WP9 Equal Tee is low at all concentrations and ambient temperatures. At high temperatures or concentrated solutions, the speed of these WP9 alloy steel cross-butt weld pipe fittings is usually too high for sufficient service life. Salts in the alloy steel WP9 reducer can form when hydrochloric acid comes into contact with iron or copper. This is because these WP9 alloy steel stubs have a lower tendency for harmful intermetallic phases to precipitate, resulting in higher ductility than other alloys during and after various temperature cycling conditions.

WP9 Alloy Steel End Cap Butt Weld Pipe Fittings can be welded using all common welding techniques, but oxy-fuel welding and submerged arc welding processes are recommended if the manufactured product will be used in a corrosive environment It will not be. For these WP9 alloy steel disc cap butt weld pipe fittings, special precautions must be taken to avoid excessive heat input.

Specifications:-

Alloy Steel WP9 Pipe Fittings Specifications

Alloy Steel WP9 Pipe Fittings SpecificationsSpecifications:ASTM A234 / ASME SA234Size:1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)Standards :ASME/ANSI B16.9, ASME B16.28, MSS-SP-43Thickness:Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXSType:Seamless / Welded / Fabricated

Benefits:-

WP9 alloy steel, which typically contains chromium and molybdenum, is designed to withstand elevated temperatures. This makes it ideal for use in industries like power generation and petrochemical where high operating temperatures are common.

The alloying elements in WP9 steel provide improved tensile strength and resistance to deformation. This allows the fittings to handle high-pressure environments effectively.

Conclusions:-

WP9 alloy steel, which typically contains chromium and molybdenum, is designed to withstand elevated temperatures. This makes it ideal for use in industries like power generation and petrochemical where high operating temperatures are common.

Email Id:[email protected] Contact No:-88797–09191

Alloy Steel WP9 Buttweld Fittings Manufacturers in Mumbai,Supplier In Mumbai,Stocklist In Mumbai,Exporter in Mumbai

Introduction:- Alloy Steel WP9 Buttweld Fittings Manufacturers in Mumbai

Mumbai, as a major industrial hub in India, is home to numerous manufacturers specializing in high-quality alloy steel buttweld fittings. Alloy Steel WP9 is particularly notable for its excellent performance in high-temperature and high-pressure environments, making it a popular choice for industries such as oil and gas, power generation, and petrochemicals.

Manufacturers in Mumbai offer a wide range of WP9 buttweld fittings, including elbows, tees, reducers, and caps, which are designed to provide robust and reliable connections in piping systems. These fittings are manufactured according to stringent industry standards and specifications to ensure durability and performance.

Product Overview:-

Shasan Piping Solution is a famous trader, manufacturer and exporter of WP9 Alloy Steel Pipe Fittings. This fitting should only be used with nitric acid solutions up to 0.5% concentration at room temperature. The proportion of these WP9 angle butt welded alloy steel pipe fittings increases as the sulfur dioxide content in the atmosphere increases (such as can occur in industrial areas).

In pure, air-free acids, the corrosion rate of alloy steel WP9 Equal Tee is low at all concentrations and ambient temperatures. At high temperatures or concentrated solutions, the speed of these WP9 alloy steel cross-butt weld pipe fittings is usually too high for sufficient service life. Salts in the alloy steel WP9 reducer can form when hydrochloric acid comes into contact with iron or copper. This is because these WP9 alloy steel stubs have a lower tendency for harmful intermetallic phases to precipitate, resulting in higher ductility than other alloys during and after various temperature cycling conditions.

Specifications:-

Alloy Steel WP9 Pipe Fittings Specifications

Alloy Steel WP9 Pipe Fittings Specifications

Specifications

:

ASTM A234 / ASME SA234

Size

:

1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Type

:

Seamless / Welded / Fabricated

Benefits:-

WP9 Alloy Steel End Cap Butt Weld Pipe Fittings can be welded using all common welding techniques, but oxy-fuel welding and submerged arc welding processes are recommended if the manufactured product will be used in a corrosive environment It will not be. For these WP9 alloy steel disc cap butt weld pipe fittings, special precautions must be taken to avoid excessive heat input.

Conclusions:-

Mumbai's thriving industrial sector and well-established infrastructure make it a key location for sourcing Alloy Steel WP9 Buttweld Fittings, with several reputable manufacturers offering top-notch products and services.

Look for manufacturers who comply with international standards and possess relevant certifications, such as ISO 9001, to guarantee product quality.

Email Id :- [email protected]  Contact No:- 88879709191

Carbon Steel A182 Flanges Manufacturers In India,Supplier In India ,Stocklist In India ,Exporter in India

Introduction:- Carbon Steel A182 Flanges Manufacturers In India

Carbon steel A182 flanges are crucial components used to connect pipes, valves, and other equipment in high-temperature and high-pressure systems. They are known for their robustness and ability to handle extreme conditions, making them indispensable in sectors requiring reliable performance.

India is a significant player in the global manufacturing sector for carbon steel flanges, particularly those conforming to the ASTM A182 standard. The country's manufacturing industry is well-equipped with advanced technologies and practices, enabling it to produce high-quality flanges for various industrial applications. These flanges are essential in industries such as oil and gas, power generation, chemical processing, and more.

Product Overview:-

India is a significant hub for the production of carbon steel A182 flanges, offering a diverse range of high-quality products tailored to various industrial applications. Indian manufacturers leverage advanced technology and strict quality controls to deliver flanges that meet international standards.

Indian manufacturers provide a wide variety of carbon steel A182 flanges to cater to different needs and specifications

Manufacturers offer various grades of carbon steel A182 flanges to meet different performance requirements:

ASTM A182 F1: Low carbon steel suitable for moderate temperatures.

ASTM A182 F5: Alloyed with chromium and molybdenum, providing good strength and oxidation resistance at higher temperatures.

ASTM A182 F11: Medium carbon steel with chromium and molybdenum, offering better strength and heat resistance.

ASTM A182 F22: High-carbon steel with enhanced chromium and molybdenum content for superior high-temperature performance.

Specification List of Carbon Steel ASTM A 182 Flanges

ASME/ANSI B 16.5

A182 F92 Welding Neck Flange, A182 F92 Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, A182 F92 Lap Joint Flange, Threaded Flange, A182 F92 Ring Type Joint Flange

PRESSURE CLASS

150, 300, 400, 600, 900, 1500, 2500

ASME/ANSI B 16.47

A182 F92 Welding Neck Flange, A182 F92 Blind Flange [Series A & B]

PRESSURE CLASS

75, 150, 300, 400, 600, 900

ASME/ANSI B 16.36

A182 F92 Welding Neck Flange, A182 F92 Slip on Flange, A182 F92 Threaded Flange

PRESSURE CLASS

300, 400, 600, 900, 1500, 2500

BS 4504 SEC 3.1

A182 F92 Welding Neck Flange, A182 F92 Hubbed Slip on Flange, A182 F92 Hubbed Threaded Flange, Lapped Pipe End Flange, A182 F92 Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange

PRESSURE CLASS

PN 2.5 TO PN 40

BS 4504[PART 1]

A182 F92 Welding Neck Flange, A182 F92 Hubbed Slip-On Hubbed Threaded, Plate Flange, A182 F92 Loose Plate With Weld On Plate Collar, Blank Flange

PRESSURE CLASS

PN 2.5 TO PN 400

BS 1560 BOSS

A182 F92 Welding Neck Flange, Socket Welding Flange, A182 F92 Slip-On Flange, A182 F92 Blind Flange, A182 F92 Screwed Boss Flange, A182 F92 Lapped Flange

PRESSURE CLASS

150, 300, 400, 600, 900, 1500, 2500

BS10

A182 F92 Welding Neck Flange, A182 F92 Plate Slip-On Flange, A182 F92 Screwed Boss Flange, Slip-On Boss Flange, A182 F92 Blind Flange

TABLE

D, E, F, H

DIN FLANGES

DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673

PRESSURE CLASS

PN 6 TO PN 100

Benefits:-

A182 Carbon Steel ASTM flanges are manufactured with ideal chemical experiments and connections and will not wear out quickly.

This grade of Carbon Steel ASTM flanges is used for stainless steel pipe flanges, rolled alloys, forged pipes, valves, forged fittings, and other high temperature applications. A182 Carbon Steel ASTM flange is one of the results of the best chemical experiments and good connections. These flanges don't wear out as quickly. Widely used in petroleum industry, chemical industry, paper industry and many other industries. Due to its properties, this type of flange is one of the most reliable products that can be used for a long time and does not require repairs immediately after installation. You can trust blindly the durability of this product if you buy it from the right place.

Conclusions:-

Carbon Steel A182 flanges are highly versatile components used in a wide range of industrial applications. They are well-suited for high-temperature and high-pressure environments, making them a reliable choice for sectors such as oil and gas, power generation, and chemical processing. Their ability to handle severe conditions underscores their importance in critical infrastructure.

Carbon Steel A182 Flanges are a critical component in many industrial systems, providing strength, durability, and reliability in challenging conditions. Their versatility, coupled with cost-effectiveness, makes them a preferred choice for a wide range of applications. However, consideration of their limitations regarding corrosion resistance and temperature constraints is essential for optimal performance.

Email Id :- [email protected]  Contact No:- 88879709191

Introduction:-

Alloy Steel WP22 Buttweld Fittings are specific types of fittings used in piping systems that are made from Grade WP22 alloy steel. These fittings are designed to be welded to pipes or other fittings for a secure and leak-proof connection. WP22 refers to the grade of alloy steel, which in this case is suitable for high-temperature and pressure applications.

Key features and uses of Alloy Steel WP22 Buttweld Fittings include:

Material Composition: Typically made from Chromium-Molybdenum alloy steel (ASTM A234 WP22), which provides excellent resistance to corrosion and high temperatures.

Applications: Used in industries such as oil and gas, petrochemicals, power generation, and refining where high pressure and temperature conditions are common.

Types of Fittings: Includes elbows, tees, reducers, caps, and stub ends, among others, which are available in various sizes and thicknesses to suit different piping requirements.

Welding: These fittings are welded to pipes using the buttwelding process, ensuring a strong and durable joint.

Product Overview:-

Alloy Steel WP22 Buttweld Fittings represent a pinnacle of strength, durability, and corrosion resistance in industrial piping systems. Manufactured and supplied by Shasan Piping Solution, a trusted name in the industry, these fittings are designed to meet the demanding requirements of various applications. The alloy’s unique composition provides enhanced resistance to high temperatures and corrosive environments, making Alloy Steel WP22 Buttweld Fittings a reliable choice for critical operations.

Shasan Piping Solution has established itself as a leading player in the manufacturing and supply of Alloy Steel WP22 Buttweld Fittings. With a commitment to quality and innovation, the company has garnered a reputation for delivering products that meet international standards. Shasan Piping Solution’s state-of-the-art facilities ensure precision manufacturing, and their team of experts focuses on providing tailored solutions to meet the specific needs of diverse industries.

Specifications :-

Specifications:ASTM A234 / ASME SA234Size:1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)Standards :ASME/ANSI B16.9, ASME B16.28, MSS-SP-43Thickness:Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXSType:Seamless / Welded / Fabricated

Brief:-

Alloy Steel WP22 Buttweld Fittings from Shasan Piping Solution boast exceptional weldability, allowing for easy and secure installations in various piping systems. The fittings exhibit robust mechanical properties, making them suitable for high-pressure applications in industries such as oil and gas, power generation, and chemical processing. Shasan Piping Solution emphasizes the free-machining attributes of these fittings, contributing to efficient fabrication processes and ensuring seamless integration into complex industrial setups.

Conclusions:-

These fittings find applications across a spectrum of industries, including oil and gas, where they contribute to the construction and maintenance of pipelines. In the power generation sector, Alloy Steel WP22 Buttweld Fittings play a crucial role in power plant infrastructure. Their corrosion resistance makes them an ideal choice for chemical processing plants, ensuring the safe transport of corrosive substances. With Shasan Piping Solution’s dedication to quality, Alloy Steel WP22 Buttweld Fittings stand as a testament to reliability and performance in the most demanding industrial environments.

For Kindly Information

Contact:-88797–09191

Introduction to Carbon Steel 8.8 Fasteners

Carbon Steel 8.8 fasteners are integral components used extensively across industries for their robust mechanical properties and versatility in various applications. Composed primarily of carbon, manganese, and additional alloying elements, these fasteners offer a balance of strength, durability, and cost-effectiveness.

Material Composition and Properties: Carbon Steel 8.8 is characterized by its medium carbon content, typically between 0.30% to 0.50%, along with manganese to enhance hardness and strength. The presence of alloying elements like phosphorus and sulfur contributes to improved machinability and mechanical properties such as high tensile strength and good ductility.

Product Overview :-

The standard for structural-grade fasteners is the Din 933 Grade 8.8, characterized by medium carbon steel that meets the specifications of Bs 3692 Bolt Grade 8.8. Heat treatment involving quenching and tempering is applied to this medium carbon steel. Grade 8.8, being a medium carbon steel, is cold and tempered, offering high tensile strength, roughness, and toughness.

Carbon Steel 8.8 Fasteners come with various advantages, including robust construction, easy installation, high tensile strength, good elasticity, high corrosion resistance, and a long service life, all at a reasonable price. These fasteners exhibit high mechanical strength to endure harsh environments.

The heat-treated grade 8.8 fasteners are known for their solid tensile strength and effective performance in various settings, making them suitable for applications in processing, railroad, and motorized equipment.

Specifications:-

Specification

ASTM F568 / ASME SF568

Dimension

DIN, ISO, ASTM, JIS, BS, GB, IS and all International Standards

Size Range

M3 - M56 | 3/6" to 2" | Custom Sizes

Length

3 mm to 200 mm

Types and Applications: Carbon Steel 8.8 fasteners come in various types to suit different fastening needs:

Bolts: Hex bolts, carriage bolts, structural bolts

Nuts: Hex nuts, lock nuts, flange nuts

Screws: Machine screws, wood screws, self-tapping screws

Washers: Flat washers, spring washers

These fasteners find wide application in industries such as construction, automotive, manufacturing, and infrastructure. They are used for assembling structural components, machinery, equipment, and other critical installations where strength and reliability are paramount.

Standards Compliance: Carbon Steel 8.8 fasteners adhere to international standards such as ISO 898-1 and ASTM F568M, ensuring consistency in mechanical properties and dimensional specifications across different manufacturing batches.

Benefits:

Strength and Reliability: High tensile strength and toughness for secure fastening in demanding applications.

Cost-Effectiveness: Provides a cost-effective solution compared to higher alloy steels, suitable for projects with budget constraints.

Versatility: Suitable for a wide range of applications across industries due to their strength, durability, and availability in various sizes and configurations.

Customization: Can be customized in terms of size, coating, and packaging to meet specific project requirements, enhancing flexibility and usability.

Conclusions:-

Carbon Steel 8.8 Fasteners find wide applications in industries such as Oil and Gas processing, Water treatment equipment, Chemical equipment, Heat exchangers, Paper and Pulp industries, Condensers, and more. The quality control team conducts various tests to ensure the performance of these fasteners.

Email Id :- [email protected]  Contact No:- 88879709191

Introduction: INCOLOY 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. It exhibits excellent resistance to corrosion in various corrosive environments, making it suitable for a wide range of applications. INCOLOY 825 flanges are widely used in industries such as chemical processing, oil and gas, and marine engineering, where corrosion resistance and reliability are essential.

Description: INCOLOY 825 flanges are crafted from the robust INCOLOY 825 alloy, which offers exceptional resistance to corrosion, including both reducing and oxidizing acids, alkalis, and seawater. These flanges come in various types, such as weld neck, slip-on, socket weld, threaded, and blind flanges, to cater to diverse piping system requirements.

Benefits:

Corrosion Resistance: INCOLOY 825 provides excellent resistance to corrosion in various aggressive environments, including sulfuric acid, phosphoric acid, and seawater, making it suitable for chemical processing and marine applications.

High Temperature Strength: These flanges maintain their mechanical properties at elevated temperatures, ensuring reliable performance in high-temperature applications such as heat exchangers and reactors.

Oxidation Resistance: INCOLOY 825 exhibits good resistance to oxidation and scaling at elevated temperatures, extending the service life of components in thermal environments.

Excellent Weldability: These flanges offer good weldability, allowing for easy fabrication and assembly of complex structures without compromising performance.

Versatility: They are versatile components used in various industries, including chemical processing, oil and gas, marine engineering, and desalination plants, due to their superior corrosion resistance and reliability.

Specification:

Material: INCOLOY 825 (UNS N08825)

Standard: ASTM B564

Chemical Composition: Nickel (≥ 38%), Chromium (19.5-23.5%), Iron (22% min), Molybdenum (2.5-3.5%), Copper (1.5-3%), Titanium (≤ 0.6%), Carbon (≤ 0.05%)

Mechanical Properties: Tensile Strength ≥ 550 MPa, Yield Strength ≥ 220 MPa, Elongation ≥ 30%

Product Overview: INCOLOY 825 flanges are available in various sizes, pressure ratings, and configurations to meet specific project requirements. They are designed for easy installation and maintenance, facilitating efficient assembly and disassembly of piping systems in industrial applications.

INTRODUCTION:-

Inferable from our latest gathering unit, we give a broad assortment of Female Elbow Fittings to our clients at the best expenses. These female elbows are utilized to change the stream's heading by a conspicuous degree between two lines or chambers.

DESCRIPTION:-

Female elbow fittings are vital components used in piping systems to change the direction of flow while maintaining a leak-proof connection. They are extensively utilized across industries such as plumbing, irrigation, HVAC, and chemical processing. Female elbow fittings enable efficient routing of fluids or gases in pipelines, accommodating changes in direction without compromising system integrity

BENEFITS:-

Directional Flexibility: Female elbow fittings provide the flexibility to change the direction of flow in piping systems, allowing for efficient routing around obstacles or through confined spaces.

Leak-proof Connection: These fittings are engineered to create a secure and leak-proof connection, ensuring the reliability and integrity of the piping system.

Space Optimization: Female elbow fittings help optimize space by allowing pipelines to navigate around corners or fit into tight spaces while maintaining optimal flow efficiency.

Versatility: They find applications in a wide range of industries due to their versatility, reliability, and compatibility with various materials and operating conditions.

SPECIFICATION:-

Material: Brass, stainless steel, copper, PVC, etc., chosen based on factors such as corrosion resistance, pressure rating, and temperature tolerance.

Thread Type: NPT (National Pipe Thread), BSP (British Standard Pipe), or compression fittings, depending on industry standards and application requirements.

Pressure Rating: Varied pressure ratings to accommodate different operating conditions, ranging from low-pressure to high-pressure applications.

Temperature Range: Suitable for specific temperature ranges to ensure compatibility with the fluid or gas being transported.

Size: Available in various sizes ranging from 1/8" to several inches in diameter, catering to different pipe diameters and flow requirements.

PRODUCT OVERVIEW:-

Female elbow fittings typically feature a female threaded connection on one end and a male threaded connection on the other, joined at a 90-degree angle. They are manufactured using materials such as brass, stainless steel, copper, or PVC, depending on the specific application requirements. These fittings may incorporate different sealing mechanisms, such as NPT threads or compression fittings, to ensure a tight and secure connection.

CONCLUSION:-

Female elbow fittings play a crucial role in piping systems, offering directional flexibility, leak-proof connections, and space optimization. Their versatility, reliability, and compatibility with different materials and operating conditions make them indispensable across industries in India and globally. Whether in plumbing systems, irrigation networks, or industrial processes, female elbow fittings manufactured in India meet stringent quality standards, contributing to the seamless operation and efficiency of piping systems.

INTRODUCTION:-

Shasan Piping Solution is one of the fundamental Manufacturers, Suppliers, Exporters of Inconel Alloy 601 Wire in India. This Inconel 601 Wires is an oxidation and utilization safe The Inconel 601 Wire Cross section is principally strong regions for an effect from columbium and molybdenum.

Alloy 601 Woven Wire Network achieves high-strength levels from strong regions for the effects of Molybdenum and Niobium (Columbium) from room temperature up to 800 Degree C. For high temperature applications more than 601 Degree C (1112 Degree F), this procedure developed Inconel 601 Spring Steel Wire Network is by and large around used

DESCRIPTION:-

Inconel 601 wire is meticulously crafted by Indian manufacturers using advanced techniques to ensure exceptional quality and performance. It exhibits superb resistance to heat, oxidation, and aqueous corrosion, making it ideal for demanding environments.

BENEFITS:-

High-Temperature Resistance: Inconel 601 wire can withstand elevated temperatures, making it suitable for use in heat treatment fixtures and furnace components.

Corrosion Resistance: Its exceptional corrosion resistance extends its lifespan in aggressive environments, including those containing sulfur compounds and alkaline solutions.

Mechanical Strength: The alloy maintains its mechanical properties even at high temperatures, ensuring reliability in challenging conditions.

Versatility: Inconel 601 wire finds applications in industries such as aerospace, chemical processing, power generation, and automotive, owing to its versatility and performance

SPECIFICATION:-

Specifications: ASTM / ASME B 166, SB 166

Standard: ASTM / ASME

Size: 15NB to 150NB In

Length: UUPTO 1 METERS

Type: Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.

PRODUCT OVERVIEW:-

Indian manufacturers produce Inconel 601 wire in various forms, including round, flat, and shaped wires, to cater to diverse industry requirements. These wires undergo stringent quality control measures to meet international standards and customer specifications.

CONCLUSION:-

Inconel 601 wire manufactured by Indian producers offers exceptional heat and corrosion resistance, mechanical strength, and versatility, making it indispensable in various industrial applications. With its superior quality and adherence to international standards, Inconel 601 wire from Indian manufacturers stands as a reliable choice for demanding environments worldwide.

CONTACT US:-

INTRODUCTION:-

Shasan Piping Solution is a basic Manufacturers and exporters of the ferrous and nonferrous things. We likewise manage the whole family stainless steel and Nitronic 50 and XM 19 Fasteners.

We anyway, gathering the changed kind of the thing according to the bearing from the client and course. Nitronic 50 and XM 19 fastener are made with substance sytheses like carbon, nickel, silicon, manganese, chromium, aluminum, and sulfur. 

DESCRIPTION:-

In the dynamic landscape of industrial fasteners, Nitronic 50 emerges as a top contender, renowned for its exceptional properties. In India, a cohort of manufacturers has embraced the challenge of producing Nitronic 50 fasteners to cater to diverse industrial needs.

BENEFITS:-

Corrosion Resistance: Exceptional resistance to corrosion in harsh environments, including seawater and chemical processing plants.

High Strength: Superior strength levels, even at elevated temperatures, making them suitable for high-stress applications.

Durability: Long-lasting performance due to its robust composition, ensuring reliability over extended periods.

Versatility: Suitable for a wide range of industries, including marine, aerospace, chemical, and pharmaceutical sectors.

Resistance to Galling: Reduced risk of galling and seizing, ensuring smooth operation and easy maintenance.

SPECIFICATION:-

ASTM: ASTM A 193/194 / ASME SA 193/194

Dimension Standard: DIN, ASTM, BS and all International Standards

Length: 3 mm to 200 mm

Bolt / Screw Size: M3 - M56 | 3/6" to 2" | Custom Sizes

Nuts Size: M02 to M33 | Custom Sizes

Washers Size: M3 - M56 | 3/6" to 2" | Custom Sizes

PRODUCT OVERVIEW:-

Types: Bolts, nuts, screws, washers, and studs, among others.

Sizes and Dimensions: Available in various sizes and dimensions to accommodate different applications.

Applications: Widely used in critical applications such as marine components, aerospace structures, chemical processing equipment, and medical devices.

Specialized Coatings: Optional coatings like passivation or electropolishing may enhance corrosion resistance further.

CONCLUSION:-

These fastener are sturdily organized and best for use in the substance district. These fastener are helpful in clinical updates on account of the properties like low charming porousness, use, opposition, and all the more clear strength. These fastener are adaptable, silly and Stainless for use in the savage conditions.

These safeguarded need to go through many tests, for example, influence test, hardness test, substance test, mechanical test, hydrostatic test, radiography test, radiating test, fixing test, etc also.

INTRODUCTION:-

Shasan Piping Solution is one of the preeminent Manufacturers and Suppliers of Hastelloy B3 Fasteners. We give the entire level of attach in different points of view, sizes, types and determinations.

Our offered Fasteners have momentous security from hydrochloric shocking at all concentrations and temperatures. Hastelloy B3 Fasteners are made by utilizing ideal quality unrefined substances. 

DESCRIPTION:-

These things are utilized in diminishing acids affiliations and Fasteners tofastenersher of warming stuff. Hastelloy B3 Secure are Fasteners produced using mix containing nickel and molybdenum as base part containing chromium and advancements of cobalt and tungsten.

Our offered Fasteners are typical for exceptional hydrochloric harming, sulfuric acids, hydrobromic shocking, acidic deplorable, phosphoric harming, and formic harming. These gets offer mind blowing strength and heartiness in any acidic and decreasing media.

BENEFITS:-

Hastelloy B3 Fasteners pushes smooth overseeing through welding gear and diminished tip in contact tips. We are a proactive association that offers Hastelloy B3 Fasteners and other quality things that meet and beat client unequivocal necessities and as such assurance all out satisfaction.

We give a huge level of materials like Hastelloy B3 Fasteners. Our offered Fasteners show extraordinary security from pitting, opening disintegrating and stress use breaking in any chloride containing conditions.

SPECIFICATION:-

Specifications

ASTM B574 / ASME SB574

Fasteners size

Bolt / Screw Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Nuts Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Washers Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Machine Screws Size : M1.6 – M12 Self Tapping Screw Size : No.2 – No. 14

Fasteners Length

3 mm to 200 mm

Fastener Threads

UNF, BSW, BSF, METRIC, UNC or as required

Standard of High Nickel Alloy Fasteners

DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Hex nuts

Dimensions

DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3

PRODUCT OVERVIEW:-

Shasan Piping Solution trusts in serving the most adroit thought of things by utilizing imaginative social event strategies. We supply these Fasteners to our clients at really reasonable costs. We have done current stuff for social event wide degrees of things by picking the astounding thought of crude substance.

We have picked gifted arranged specialists and qualified workers that produce Hastelloy B3 Fasteners. Our specialists screen each time of the party development to guarantee twisting free creation.

CONCLUSION:-

Our offered Fasteners go through different damaging and non-disastrous tests to insist the quality and execution. These tests are performed under the serious oversight of our quality educated trained professionals. Also, we have encountered laborers who attempt to foster things quality as well.

For safe and wickedness free new development and transportation of thing, we utilize reasonable pressing material. Shasan Piping Solution Association offers secure entry alliance. We endeavor to convey the things on time. We utilize a steady system for transport to keep away from harms. We other than offer bundling and transportation choices as shown by basics of our regarded clients.

INTRODUCTION:-

Shasan Piping Solution is one of the most splendid exporter, Manufacturers and Suppliers of Nitronic Blend 60 Round Bars in India. The oxidation check of Nitronic Alloy 60 Round Bar (Nitronic 60 Bars) is clearly Stainless Steel 309 Grade, and far higher to Stainless Steel 304 Grade. This grade is best seen for its wear and disturbing check.

DESCRIPTION:-

Nitronic Composite 50/XM-19 Splendid Bar, Nitronic Alloy 50 Level Bar Exporter, Alloy 50 Cold Rolled Bars Manufacturers in India

BENEFITS:-

In the mean time, the improvements of Manganese and Silicon have given these Nitronic 60 Round Bars (Nitronic 60 Bars) as a relationship to oblige wear, irritating, and pushing even in the Stainless condition. Generally speaking called UNS S21800 Round Bars, our Nitronic Alloy 60 Bars are available to our gigantic clients in various degree of widths, wall thicknesses and sizes in changed structure what's more at genuinely reasonable rates.

SPECIFICATION:-

Dimension : EN, DIN, JIS, ASTM, BS, ASME, AISI

Grade : Nitronic Alloy 60 (UNS No. S21800) Round Bars

Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline

Application : Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining

Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.

PRODUCT OVERVIEW:-High Strength: Nitronic 60 round bars exhibit remarkable strength properties, making them suitable for applications where high mechanical strength is crucial. They offer comparable strength to many other high-strength materials such as duplex stainless steels and some grades of alloy steel.Corrosion Resistance: One of the standout features of Nitronic 60 is its outstanding corrosion resistance. It resists corrosion in various environments, including acidic and chloride-rich conditions, making it ideal for applications where corrosion is a concern, such as marine environments, chemical processing, and oil and gas industries.

CONCLUSION:-

Nitronic 60 is a highly versatile austenitic stainless steel known for its exceptional combination of high strength, excellent corrosion resistance, and good mechanical properties even at elevated temperatures. Nitronic 60 round bars are a popular form of this alloy used in various industries for applications requiring robust performance in demanding environments.

Product Overview:

High Strength: Nitronic 60 round bars exhibit remarkable strength properties, making them suitable for applications where high mechanical strength is crucial. They offer comparable strength to many other high-strength materials such as duplex stainless steels and some grades of alloy steel.

Corrosion Resistance: One of the standout features of Nitronic 60 is its outstanding corrosion resistance. It resists corrosion in various environments, including acidic and chloride-rich conditions, making it ideal for applications where corrosion is a concern, such as marine environments, chemical processing, and oil and gas industries.

Wear Resistance: Nitronic 60 round bars possess excellent wear resistance, which is essential for applications subjected to abrasive conditions or sliding wear. This property makes them suitable for use in components exposed to abrasive media or heavy wear, such as pump shafts, valve stems, and bearings.

Heat Resistance: Nitronic 60 maintains its mechanical properties even at elevated temperatures, making it suitable for applications where heat resistance is required. It can withstand high temperatures without losing its strength or corrosion resistance, making it a reliable choice for high-temperature applications in various industries.

Machinability: Despite its high strength and hardness, Nitronic 60 round bars offer good machinability. They can be easily machined using conventional machining techniques, allowing for the production of complex components with tight tolerances.

Conclusion:

Nitronic 60 round bars offer a compelling combination of high strength, excellent corrosion resistance, and good mechanical properties, making them a versatile material choice for a wide range of applications across various industries. Whether it's for components subjected to high mechanical loads, corrosive environments, elevated temperatures, or abrasive conditions, Nitronic 60 round bars provide reliable performance and longevity

CONTACT US:-

INTRODUCTION:-

Shasan Piping Solution is a dependable Manufacturers, Exporters, and Suppliers of the a wide range of mechanically utilized items. We are giving the awesome nature of Alloy 20 Sheets and Plates to our regard benefactors for fulfilling their various requests. We are the client's aggressive industry that is giving something similar to our clients at various principles, details, sizes, wall thickness, surface gets done, and shapes. 

BENEFITS:-

Alloys is the material that is chromium, nickel, and iron-based austenitic compound. It is made for guaranteeing the higher protection from the corrosive assaults, especially to the sulfuric corrosive. This material is having excellent opposition capacity to the overall consumption, cleft erosion and pitting too. Likewise, it opposes sulfuric corrosive, phosphoric corrosive, and nitric corrosive. Likewise, it is containing niobium for the adjustment against the sharpening. 

SPECIFICATION:-

Alloy 20 Sheets and Plates Specification : ASTM B463 / ASME SB463 Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc Thickness : 0.3 mm to 120 mm Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

PRODUCT OVERVIEW:-

The produced scopes of Alloy 20 Sheets and Plates are having numerous great properties to offer in view of which it has turned into an ideal fit for various purposes. The properties found in it are high elasticity, great layered precision, predominant surface completions, rough development, high strength, long usefulness, non-destructive body, endure high temperature, and so on.

CONCLUSION:-

Today Alloy 20 Sheets and Plates are widely utilized in numerous modern applications. It resembles heat exchangers, condensers, mash and paper industry, petrochemicals, drugs, specialty synthetics, substance industry, oil and gas handling, seawater applications, cars, building, and developments.

Alloy 20 Sheets and Plates are completely quality tried before dispatched from our industry. The tests are significantly finished for really looking at the item strength. The tests are pitting erosion tests, strength tests, positive material ID tests, and so on. The bundling of the equivalent is finished in wooden beds for more secure transportation.

CONTACT US:-

INTRODUCTION:-

Shasan Piping Solution is the noticeable Manufacturers and Exporters in the wide degrees of SMO 254 Seamless and Welded Pipes and Tubes. We are comparably an extraordinary Manufacturer of the normal thought of the solid and welded Pipes and Tubes. The Pipes and Tubes are available to the clients in various nuances. A piece of the nuances where the Pipes and Tubes are open are surface realization, end finish, perspectives, shapes, sizes, length, and thickness

BENEFITS:-

Our made Pipes and Tubes are open in the scope of heavenly and solid standards. Regardless, it is made using the austenitic grade of Stainless steel which is passionately utilized with having the high obstacle limit. The Pipes and Tubes are having the best affirmation from pitting and hole deterioration opposition. 

SPECIFICATION:-

SMO 254 Pipe Specification : ASTM A312, A358 / ASME SA312, SA358 SMO 254 Tube Specification : ASTM A213, A269, A249, A511, A554 / ASME SA213, SA269, SA249, SA511, SA554 SMO 254 Pipe Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes. SMO 254 Tube Size : 1/2" OD to 8" OD. Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS Type : Seamless / ERW / Welded / Fabricated Pipes Form : Round, Square, Rectangular, Oval, Hydraulic Etc Length : Single Random, Double Random & Required Length End : Plain End, Beveled End, Treaded End Protection : Plastic Caps Outside Finish : 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements

PRODUCT OVERVIEW:-

SMO 254 Seamless Tubes are utilized in the undertakings for having the ideal development of liquids starting with one spot then onto the accompanying. This is normally utilized in the gas cleaning associations with the best stream that is there with the desalination. The Pipes and Tubes are open in many plans like square, rectangular, electro unblemished, hexagonal, and different others. It is utilized in the warm chloride conditions with the pitting and breaking down impediment conditions.

CONCLUSION:-

With the presence of the Stainless steel alloying parts, the SMO 254 Seamless Pipes Tubes are having various properties. A piece of the properties which are there with the Pipes and Tubes are usage deterrent, momentous adaptability, solidness, high flexibility, impossible yielding strength, persistence in the raised temperatures. The presence of the properties is the explanation that the Pipes and Tubes are utilized in the undertakings for various applications. Thusly, a piece of the undertakings which are utilizing SMO 254 Welded tubes are petrochemical, drugs, oil and gas, squash and paper, rail Pipes, improvement, close to the sea gear, compound stuff, and others. They are having the smooth development of work with the assistance of the Pipes and Tubes.

CONTACT US:-