Rex Sealing & Packing Industries Ltd

Trying to save money by choosing cheaper gaskets often looks sensible at first, but in practice, it usually creates bigger problems later. In industrial maintenance, dependable performance matters far more than a low initial price. In fact, almost 70% of sealing failures are linked to the wrong material selection. That is why moving toward high-performance gasket solutions is not just a purchase decision; it is a long-term operational strategy.

Choosing durable sealing materials such as specialised graphite sheets or advanced products from a trusted non-asbestos manufacturer is one of the smartest ways to keep equipment running efficiently and safely.

If you are considering that shift, this guide explains how graphite sheets perform, how they support plant safety, and what to look for when selecting a manufacturer.

What Are Industrial Sealing Sheets?

Industrial sealing sheets are flexible materials that are shaped into gaskets and fitted between pipe flanges or metal surfaces. When compressed, they help prevent leakage and keep systems operating without unnecessary interruptions.

A quality graphite sheet does more than block leaks. As the bolts are tightened, it fills small surface imperfections in the metal to create a secure seal. Likewise, premium non-asbestos gasket sheets are engineered with safe fiber blends that deliver similar performance without the health concerns associated with older materials.

Graphite Sheets: Built for Extreme Heat

When standard rubber materials fail or polymers begin to break down under high temperatures, engineers often turn to graphite sheets. Here is why: Industrial Sealing Materials by Rex Sealing

Thermal Resilience: Performs from -200°C to 450°C in oxidizing environments (up to 650°C in reducing or inert conditions) across thousands of cycles.

Chemical Resistance: Handles sulfuric acids, superheated steam, and most aggressive media.

Low-Stress Hug: Softness and compressibility mean less bolt torque for a perfect seal.

If your application combines extreme temperatures with sealing demands, choosing the right gasket material alongside thermal protection can make a noticeable difference. For a deeper understanding of high-temperature performance, explore our guide on Heat Resistant Tape: Types, Temperature Ratings & Industrial Applications, which explains how different tapes work alongside sealing solutions in demanding environments.

The Non-Asbestos Revolution

The shift away from asbestos in India was not only about compliance, but it also improved performance.

Earlier gasket materials made with asbestos often lost thickness over time, which meant bolts had to be retightened more frequently. Today, a non-asbestos gasket sheet manufacturer uses engineered fibre blends such as aramid and glass to create sheets that offer better insulation and improved stability. These modern materials resist creep more effectively, maintain grip under non-asbestos pressure, and hold up better in demanding production environments.

If energy efficiency and lower surface temperatures are priorities, our guide on insulated covers for industrial equipment is also worth exploring.

Pro Tips: The “Thicker is Better” Myth

Using a thicker gasket to stop leaks may seem like the safest choice, but it often creates new problems. The better approach is to select the right thickness based on the flange condition and operating pressure. A few important points to keep in mind:

Blowout Risks: A 1.5mm gasket resists push-out better than a 3mm one, with less material to extrude under pressure.

Flange Health: Go thick only if your metal warps or has deep damage. Thin works on smooth flanges.

Torque Loss: Heat softens thick gaskets more (creep rises with thickness), so bolts loosen faster.

Golden Rule: Use the thinnest gasket that seals flange flaws standard is 1.5mm for new flanges up to 24″.

A quick note: while 1.5mm is usually the ideal option, older flanges that are pitted or distorted may need 3mm thickness to properly fill the gaps.

Choosing the Right Partner

The difference between smooth long-term operation and repeated shutdowns often comes down to consistency. When selecting a gasket solution, you want materials that stay reliable under pressure.

When choosing a graphite sheet manufacturer, do not settle for vague claims. Ask for proof. Certifications such as ISO 9001 and API 607 Fire Safety are strong indicators that the supplier takes reliability seriously. Manufacturers like Rex Seal offer joining sheets that are dependable for demanding gasket applications, with strong sealing performance and high material strength.

What is Gland Packing? Types, Uses, & Benefits | Rex Seal

In the world of industrial fluid management, pump gland packing is a fundamental component for blocking unwanted fluid escape along the pump shaft. Functioning as a critical seal within the stuffing box, it ensures the system maintains the necessary pressure and operational efficiency. Despite its importance, pump leakage remains a top maintenance headache in many facilities. Typically, these leaks stem from improper installation, neglected maintenance, or the selection of an unsuitable material for the task.

This guide explores the primary reasons for pump gland packing failure and offers practical strategies to ensure a leak-free operation.

What Exactly is Pump Gland Packing?

This solution consists of a specialized braided material wrapped around the shaft of a pump. Located inside the stuffing box, it creates a flexible barrier that manages fluid escape while still allowing the shaft to spin freely.

This form of industrial sealing is a staple in:

Centrifugal pumping systems

Chemical processing units

Water management facilities

General industrial processing pumps

Modern versions are typically crafted from materials like PTFE, graphite, or aramid fibres. These are woven into braided gland packing, providing the necessary resilience, flexibility, and resistance to chemical degradation required for heavy-duty use.

Why Pump Packing Systems Fail

Identifying the root causes of leakage is the first step in avoiding expensive system downtime. Here are the most frequent culprits:

1. Excessive Gland Tightening A frequent error in pump upkeep is over-compressing the gland. Many technicians mistakenly believe that a tighter seal is a better seal. However, over-tightening generates intense friction between the packing and the shaft. This often leads to:

Destructive overheating

Scoring or permanent shaft damage

Accelerated wear of the packing rings

A noticeable drop in pump performance

Prevention Tip: Adjust the gland in small increments. A controlled, steady drip (a few drops every minute) is vital for cooling the interface and providing lubrication.

2. Damage from Dry Running Reliable sealing depends on a thin film of liquid to dissipate heat. If a pump operates without sufficient fluid, the packing will quickly char, harden, and lose its sealing ability. Signs of dry-run failure include:

Hardened or "burnt" looking packing material

The presence of black debris or powder in the box

Immediate leakage following a new installation

Prevention Tip: Always verify that the pump is primed and that cooling or flushing systems are fully operational before startup. Dry running can ruin industrial packing in a matter of moments.

3. Inadequate Lubrication Sealing performance drops sharply when the environment inside the stuffing box becomes too dry. Lack of lubrication causes:

The material to become brittle or stiff

Increased mechanical friction

Early failure of the braided gland packing

Prevention Tip: Utilize appropriate flushing mechanisms and ensure the lubricants used are compatible with both the packing material and the fluid being pumped.

Professional Maintenance Checklist

Consistent monitoring can vastly improve the lifespan of your sealing solutions. Use this checklist for better reliability:

Weekly Tasks:

Observe and record the leakage rate

Verify the tension of the gland

Check the temperature levels around the stuffing box

Monthly Tasks:

Examine the condition of the shaft sleeve

Ensure the lubrication or flush system is clear

Confirm that gland bolts are tightened with even pressure

During Replacement:

Clear out all old material from the stuffing box

Seat each new ring individually

Ensure joints are staggered at 90-degree intervals

Step-by-Step: Correct Installation

Errors during setup are a leading cause of early leaks. Follow this professional sequence:

Completely extract all old rings.

Clean the shaft sleeve and the interior of the stuffing box.

Precisely cut the new rings to match the shaft diameter.

Insert rings one by one, ensuring each is seated properly.

Offset the joints around the circumference of the shaft.

Apply even pressure to the gland.

Start the equipment and make gradual adjustments during the run-in period.

Selecting Materials for Centrifugal Pumping

The ideal material is determined by the specific temperature, pressure, and chemical exposure of your process.

PTFE Packing: Best for low friction and high chemical immunity; ideal for the pharmaceutical and chemical sectors.

Graphite Packing: Designed for high-heat stability and steam applications.

Aramid Fibre Packing: Built for extreme physical strength and resisting abrasive slurries.

Synthetic Options: A versatile and economical choice for general industrial water and oil services.

Why Professionals Choose Rexseal

As a premier manufacturer, Rexseal delivers high-performance braided gland packing and sealing hardware tailored for the world's most rigorous environments. The Rexseal advantage includes:

Exceptional material durability

Broad chemical compatibility

Reliable, long-term sealing integrity

Versatility across diverse industrial sectors

Rexseal solutions are trusted globally in power generation, water treatment, chemical refining, and heavy manufacturing.

Frequently Asked Questions:

1. What are the primary triggers for pump leaks? Most leaks are caused by over-tightening, running the pump dry, using the wrong material, or poor lubrication and installation practices.

2. How long does packing usually last? Under ideal conditions and with proper care, industrial packing typically serves for 6 months to 2 years before requiring replacement.

3. Which material works best for centrifugal pumps? It depends on the media: PTFE is best for acids, Graphite for high heat, and Aramid for grit or abrasive fluids.

Choosing the Best Gland Packing for Industrial Sealing | Rexseal India

Improving Operational Efficiency with Advanced Gland Packing Types

In the world of rotating and reciprocating machinery, sealing performance is about far more than just leak prevention; it has a direct effect on operational efficiency, safety, maintenance intervals, and the overall lifespan of the asset. One of the most reliable and time-tested solutions used in heavy industry today is gland packing.

Despite the growing popularity of mechanical seals, many sectors still prefer this method due to its versatility, ruggedness, and cost-effectiveness. This guide explores the fundamentals of these systems, how they function, and why they remain a cornerstone of modern industrial operations.

What Is Gland Packing?

Gland packing is a mechanical sealing method designed to manage leakage in equipment where a moving shaft or rod exits a stationary housing. It consists of molded or braided rings compressed within a stuffing box. Once tightened, the material forms a controlled seal around the moving part while allowing for necessary movement and essential lubrication.

Unlike mechanical seals that rely on precision-machined faces, this solution depends on material resilience, controlled compression, and consistent lubrication to maintain a seal under dynamic conditions. It is particularly valued in environments where:

Operating conditions are unpredictable or harsh.

There is frequent equipment misalignment.

Maintenance must be performed without a total system shutdown.

Regulated, controlled leakage is an acceptable trade-off for reliability.

How a Gland Packing Seal Functions

A gland packing seal works by achieving a delicate balance between three specific forces:

Radial pressure exerted by the packing against the shaft.

Axial compression from the gland follower.

A thin film of lubrication between the packing material and the shaft surface.

When adjusted correctly, the system allows for a tiny amount of "micro-leakage" that serves to dissipate heat and protect the shaft from damage. It is important to note that over-tightening is a leading cause of failure, as it creates excessive friction that wears down the shaft and wastes energy.

Primary Types of Industrial Packing

Choosing the correct material is vital and depends on the specific fluid, temperature, pressure, and shaft speed of the application.

PTFE Gland Packing: Highly valued for its chemical inertness and low-friction properties. PTFE gland packing is the top choice for chemical, food, and pharmaceutical plants where preventing contamination and resisting aggressive substances are the primary goals.

Graphite Gland Packing: Known for exceptional thermal conductivity and high-temperature endurance. Graphite gland packing is a staple in refineries and power plants that deal with high-pressure steam and extreme heat.

Aramid-based Packings: Engineered for superior mechanical strength and resistance to abrasion. Aramid-based packings are frequently deployed in wastewater, mining, and pulp and paper industries where abrasive slurries would quickly destroy softer materials.

Carbon-based Packings: These provide a sophisticated balance of strength, chemical resistance, and thermal stability. Carbon-based packings are preferred in heavy process industries and petrochemical plants where dimensional stability under pressure is critical.

The Advantages in Industrial Operations

Gland packing remains a dominant force in industry because of several key benefits:

Resilience: It handles vibration and pressure fluctuations better than many precision-machined seals.

Simple Maintenance: Rings can be replaced or adjusted on-site without complex tools, minimizing downtime.

Lifecycle Economy: Low initial costs and straightforward upkeep make it a very economical choice over time.

Versatility: Materials can be customized to handle everything from corrosive acids to high-velocity steam.

Gland Packing vs. Mechanical Seals

While mechanical seals are excellent for applications requiring zero leakage, gland packing  is often the superior choice when equipment faces fluctuating conditions, when shaft runout is an issue, or when the maintenance team needs to perform rapid on-site servicing.

The Role of Industrial Sealing and Insulation Products

A gland packing seal performs best when viewed as part of a larger system. Its effectiveness is boosted when paired with other industrial sealing and insulation products, such as high-quality gaskets, thermal materials, and expansion joints. Together, these components help lower emissions, reduce heat loss, and improve total energy efficiency.

Rex Seal: Leading Gland Packing Manufacturers in India

As a prominent gland packing manufacturer in India, Rex Seal provides high-performance braided solutions specifically engineered for the rigors of the Indian industrial landscape. Their extensive range includes products made from PTFE, aramid, graphite, and carbon fiber.

In any industrial setup — be it a power plant, refinery, chemical unit, or cement mill — equipment reliability depends heavily on one often-overlooked factor: effective sealing.

Leaks, pressure loss, heat escape, or chemical seepage may start small, but they quickly escalate into safety risks, efficiency losses, and unplanned shutdowns. This is where gland packing seals, sealing products, and insulation solutions play a critical role.

At Rex Sealing & Packing Industries, we’ve spent decades designing and manufacturing sealing and insulation products that perform under real-world industrial conditions. This guide breaks down what gland packing is, how different sealing products work, and how to choose the right solution for demanding applications.

What is Gland Packing?

Gland packing is a mechanical sealing product used to control leakage in rotating or reciprocating equipment such as pumps, valves, agitators, and mixers.

It consists of braided or formed packing material that is compressed inside a stuffing box around a shaft or stem. When tightened correctly, the packing creates a controlled seal, allowing minimal lubrication leakage while preventing process fluid from escaping.

Unlike other mechanical seals, gland packing seals are -

Easier to install and adjust

More tolerant of shaft misalignment

Adjustable during operation

Cost-effective for many industrial applications

This makes gland packing a preferred sealing solution in industries where equipment runs continuously under heat, pressure, or abrasive conditions.

In practical terms, gland packing is designed to create a balance between sealing and lubrication.

A properly installed gland packing seal allows a small, controlled amount of leakage, which helps dissipate heat and reduce friction between the packing and the shaft. Eliminating leakage entirely can actually lead to overheating and premature seal failure.

This makes correct selection, installation, and adjustment of gland packing just as important as the material itself. When chosen wisely, gland packing offers dependable performance even in applications where operating conditions change or where equipment can’t be shut down frequently for the sake of maintenance.

Types of Gland Packing Seals

Different operating conditions demand different gland packing materials.

Choosing the wrong type can lead to excessive wear, leakage, or shaft damage.

Common types of gland packing seals include:

PTFE Gland Packing -

Used in chemical and pharmaceutical industries due to its excellent chemical resistance and low friction properties. It performs well in aggressive chemical environments where purity and corrosion resistance are essential.

Graphite Gland Packing -

Ideal for high temperature sealing products, especially in steam applications, power plants, and thermal systems.

Its ability to withstand extreme temperatures while maintaining sealing integrity makes it ideal for thermal systems.

Aramid Fiber Gland Packing -

Known for exceptional strength and abrasion resistance — it is often used in pumps handling slurries, wastewater or abrasive media where standard packing would wear out quickly.

Carbon & Graphite Combination Packing -

Engineered for extreme pressure and temperature conditions, offering not just durability but also thermal reliability.

At Rex Seal, gland packing is manufactured using high-quality raw materials and precision braiding techniques to ensure consistent sealing performance and longer service life.

Industrial Applications of Gland Packing

Gland packing seals are widely used across industries where reliability and safety are paramount:

Power Plants: Boiler feed pumps, steam valves, turbines

Chemical Processing: Acid pumps, reactors, agitators

Cement Industry: Slurry pumps, kilns, material handling equipment

Steel Plants: Cooling water systems, rolling mills

Oil & Gas: Valves, transfer pumps, compressors

In each of these environments, gland packing acts as the first line of defense against pressure loss, leaks, and equipment damage.

Another advantage of gland packing in industrial applications is its adaptability. Unlike many fixed sealing systems, gland packing can be retightened or adjusted during routine maintenance without dismantling the core equipment.

This flexibility is particularly valuable in older plants or heavy-duty installations where shaft wear, vibration, or misalignment are common.

As a result, gland packing seals remain a practical choice for industries that prioritize uptime, operational continuity, and ease of maintenance over more complex sealing systems.

Overview of Industrial Sealing Products

Beyond gland packing, industrial operations rely on a wide range of sealing products to manage pressure, temperature, vibration, and movement.

Common mechanical sealing products include:

Jointing sheets for static flange sealing

Fabric expansion joints to absorb thermal movement and vibration

Gaskets for pressure-tight connections

Fire sleeves for hose and cable protection

These mechanical sealing products are essential in maintaining system integrity, reducing energy losses, and protecting both equipment and personnel.

In high-temperature or high-pressure environments, sealing products must also accommodate thermal expansion and mechanical stress without losing their sealing capability. Products such as fabric expansion joints and specialized jointing sheets are designed to absorb movement while maintaining a tight seal, preventing cracks, leaks, or flange damage over time.

By using application-specific industrial sealing solutions, manufacturers can improve equipment reliability while reducing long-term maintenance and replacement costs.

As one of India’s experienced sealing products manufacturers, Rex Seal supplies solutions engineered to meet DIN, ASME, ASTM, and BIS standards.

Sealing Products vs Insulation Products

Although often used together, sealing and insulation products serve distinct functions within an industrial system -

Sealing Products are designed to -

Prevent leakage of fluids and gases

Maintain pressure and containment

Used in joints, shafts, valves, and flanges

They are typically installed at joints, flanges, shafts, and valves where leakage control is critical.

Insulation Products focus on :

Reduce heat loss or heat transfer

Protect personnel from high surface temperatures

Improve energy efficiency

Examples of insulation products include high-temperature textiles, fire sleeves, and thermal wraps. When combined correctly, sealing and insulation systems improve both safety and operational efficiency.

When properly integrated, sealing and insulation systems work together to enhance safety, efficiency, and equipment lifespan.

How to Choose the Right Sealing and Insulation Solution

Selecting the right sealing or insulation solution isn’t just about the product, it’s about the application. Each application has unique operational demands.

Key factors to consider include:

Operating temperature and pressure

Type of media (steam, chemicals, abrasive slurry)

Shaft speed and movement

Safety and compliance requirements

Maintenance frequency and accessibility

In many cases, selecting the right sealing or insulation product also involves balancing performance with cost efficiency.

While lower-grade materials may offer short-term savings, they often lead to frequent replacements, higher maintenance costs, and unplanned downtime. Investing in high-quality sealing and insulation products helps ensure consistent performance and predictable maintenance cycles.

Working with experienced sealing products manufacturers like Rex Seal ensures that material selection, design, and performance are aligned with real operating conditions — not just catalog specifications.

Why Quality Matters in Industrial Sealing Solutions

In industrial environments, sealing failure is rarely minor.

Low-quality gland packing or sealing products can lead to:

Frequent maintenance and downtime

Shaft and equipment damage

Safety hazards and environmental risks

Higher long-term operating costs

Increased leakage and energy loss

High-quality industrial sealing solutions are engineered for durability, consistency, and reliability. At Rex Seal, every product is manufactured using premium raw materials such as PTFE, graphite, aramid, and fiberglass, and tested to perform under harsh conditions.

When it comes to sealing performance, consistency remains another critical factor.

Variations in material quality, braiding density, or dimensional accuracy can lead to uneven sealing pressure and premature failure.

High-quality manufacturing processes ensure that every gland packing seal or sealing product performs as expected, batch after batch.

For industries operating round the clock, this consistency directly impacts safety, compliance, and overall plant efficiency.

Our adherence to ISO 9001 and ISO 14001 standards reflects a commitment to quality, safety, and long-term environmental responsibility.

From pumps and valves to flanges and thermal systems, effective sealing and insulation are critical to industrial performance.

Choosing the right gland packing seal, sealing products, and insulation solutions helps reduce downtime, improve safety, and extend equipment life.

With decades of expertise and a strong manufacturing foundation, Rex Sealing & Packing Industries continues to support industries worldwide with reliable, high-performance sealing solutions designed for extreme operating conditions.

Secure Industrial Operations with Rexseal Gland Packing Systems