OverHead Door of Eastern New Jersey Commercial

Loading docks are the busiest areas in distribution centers, food and beverage plants, industrial factories, manufacturing facilities, retail outlets, and warehouses.

Gaps between parked vehicles and loading docks allow outside elements such as dust, rain, snow, and wind to enter a facility and also permit air conditioning and heating to escape, increasing energy cost. Dock seals and dock shelters offer ultimate sealing efficiency and protect the loading dock area against outdoor elements.

Overhead Door Company of Eastern New Jersey, a division of DuraServ, supplies and services Serco dock seals and dock shelters for loading dock systems in Brunswick, Edison, Elizabeth, Jamesburg, Lakewood, New York, Piscataway, South Plainfield, Trenton, and Union, NJ.

Call Overhead Door Company of Eastern New Jersey at 609-642-4864 or connect with us online to choose the ideal dock seals and shelters for your loading dock systems.

 Dock Seals, Dock Shelters, and Installation Services

Dock seals and shelters provide optimum sealing effectiveness and safeguard the loading dock area from outdoor elements.

 Dock Seals

Dock seals are foam pads that compress when trailers back into them, forming a seal around three sides of a trailer. Serco dock seals are effective solutions to accommodate the loading dock's high-volume traffic with consistent trailer widths and differing heights.

Serco S600 Dock Seal w/ Fixed Head Pad

Serco S700 Dock Seal w/ Head Curtain

Serco S800 Dock Seal w/ Adjustable Head Pad

Serco S2000 Ultra Seal w/ Head Curtain

Serco S3000L L-Pad Dock Seal

 Dock Shelters

Dock shelters are enclosures that provide a wiper seal against trailer tops and sides for high sealing efficiency. They offer reliable performance and protection to withstand compression when a trailer backs up to the dock. Serco dock shelters accommodate high-volume traffic with a wide variety of vehicle sizes and types.

Serco S420 Rigid Frame Dock Shelter

Serco R620 Mechanical Rail Shelter

Serco S2200 Ultra Shelter

Serco S3200 Snap-back Dock Shelter

 Dock Seals Options

Dock seal systems shield a loading dock area from external moisture with no required maintenance.

Kelley Aqua-Shield Rain Guard System

Serco S900DD Dry Dock System

 Inflatables

Serco inflatable dock seals and shelters provide a tight seal for climate-controlled loading docks.

Serco SI300 Inflatable Dock Seal

Serco SI310 Inflatable Rail Shelter

Serco SI350 Inflatable Dock Seal

Serco SI400 Inflatable Dock Shelter

Serco SI450 Inflatable Dock Shelter

 Benefits of Dock Seals and Shelters

Increase Productivity

Increase Loading Dock Door Lifespan

Protection Against Outdoor Elements

Safer Working Environment

 New Jersey’s Most Trusted Dock Seals and Shelters Dealer and Service Provider

Over the years, Overhead Door Company of Eastern New Jersey, a division of DuraServ, has installed, sold, and serviced Serco loading dock equipment, and accessories in the New Jersey area including  Brunswick, Edison, Elizabeth, Jamesburg, Lakewood, New York, Piscataway, South Plainfield, Trenton, and Union, NJ.

The Overhead Door Company of Eastern New Jersey team works with clients to ensure safe loading dock areas while our service technicians confirm doors and dock equipment are running properly.

24 hours, 7 days a week, 365 days a year Availability

Expansive Inventory

Large Retailer

Most Trusted in the Market

One Customer – One Contact for All Service Needs

Trained and Certified Technicians

Overhead Door Company of Eastern New Jersey Commercial, a division of DuraServ, designs, installs, services, and maintains Overhead Door and Wayne Dalton commercial rolling steel doors for loading dock systems, commercial facilities, and warehousing.

Overhead Door™ and Wayne Dalton rolling door products include coil-away rolling steel service doors, insulated rolling steel fire-rated service doors, insulated rolling steel service doors, rolling fire counter doors, rolling steel fire-rated service doors, and rolling steel service doors.

Call Overhead Door Company of Eastern New Jersey Commercial at 609-642-4864 or connect with us online for economical Overhead Door and Wayne Dalton rolling steel doors and repair or installation services in New Jersey.

Rolling Steel Fire Rated Doors

Overhead Door and Wayne Dalton rolling steel fire-rated doors are available for service doors and counter doors and meet demanding fire safety standards and aesthetic requirements. Rolling fire-rated doors are designed to close automatically in the event of a fire or alarm. Fire Sentinel, a time-delay door release device that directs a fire door's closure in an emergency situation, is an additional safety feature.

Overhead Door – Fireking 630 Series – Insulated Rolling Steel Fire Rated Service Door

Overhead Door – Fireking 630 Series – Rolling Steel Fire Rated Service Door

Overhead Door – Fireking 631 Series – Rolling Steel Fire Rated Service Door

Overhead Door – Fireking 634 Series – Rolling Steel Fire Rated Service Door

Overhead Door – Model 640 Rolling Fire Counter Door

Overhead Door – Model 641 Stainless Steel Rolling Fire Counter Door

Overhead Door – Model 660 Integral Frame Rolling Fire Counter Door

Wayne Dalton – FireStar 700 Rolling Steel Fire Door

Wayne Dalton – FireStar 700C Insulated Rolling Steel Fire Door

Rolling Steel Service Doors

Rolling steel service doors are a great choice where economy and functionality are top priorities. Ideal for light-duty service doors to heavy-duty service doors as solutions for small to large spaces.

Overhead Door – Model 600 Coil–Away Rolling Steel Service Door

Overhead Door – Model 610 Rolling Steel Service Door

Overhead Door – Model 620 Stormtite Rolling Steel Service Door

Overhead Door – Model 625 Stormtite Insulated Rolling Steel Service Door

Wayne Dalton – Model 800 Rolling Steel Service Door

Wayne Dalton – Model 800C Thermotite Rolling Steel Service Door

Wayne Dalton – Model 900 Rolling Steel Service Door

Wayne Dalton – Model 926 Rolling Steel Service Door

Wayne Dalton – Secur-Vent Ventilated Rolling Steel Service Door

Wayne Dalton – Titan Rolling Steel Service Door

Rolling Grille

Rolling Grilles are designed to maximize security, visibility, and ventilation. The durable construction technique of rolling grilles ensures many years of reliable and consistent performance.

Wayne Dalton – Model 600 Rolling Grille

Rolling Sheet Doors

Rolling sheets are versatile, sturdy construction, easy operation, and longevity. Ideal for mini-storage buildings, loading docks, and service buildings.

Wayne Dalton – Model DS100 Rolling Sheet Door

Commercial Rolling Steel Door Uses

Airports & Seaports

Auto Dealerships 

Cold Storage Facilities

Colleges and Universities

Commercial Establishments

Data Centers 

Food Processing Plants

Food & Beverage Manufacturing

Government Facilities 

Grocery Stores

Hospital & Medical Facilities

Hotels

Manufacturing Facilities

Office Buildings

Residential Buildings

Restaurants

Retail Stores

Stadiums

TV Studios

Warehouse Facilities

New Jersey’s Most Trusted Commercial Rolling Doors Dealer and Service Provider

Overhead Door Company of Eastern New Jersey Commercial, a division of DuraServ, is the leading sales and service provider of commercial rolling steel doors and loading dock systems in Brunswick, Edison, Elizabeth, Jamesburg, Lakewood, New York, Piscataway, South Plainfield, Trenton, and Union, NJ. As part of the DuraServ family, we have the capability to deliver service on a national scale to customers with large facilities and sizable needs.

Choose Overhead Door Company of Eastern New Jersey Commercial

24 hours a day, 7 days a week, 365 days a year Availability

Expansive Inventory

Large Retailer

Most Trusted in the Inventory

One customer-one contact for all service needs

Over 35 years of experience

Trained and Certified Technicians

The food processing business is sensitive in terms of cleanliness and food quality. It is mandated to follow regulations regarding hygiene specifically the layout, design, and construction of buildings. Specific rules for production spaces include ease in cleaning and disinfecting, good hygiene practices, and protection against external sources of contamination.  

Why Food Processing business must secure sanitary permits? 

The reason why all food processing businesses are required to facilitate their respective sanitary permits is to ensure that the preparation of their food products is within the standard requirements. In essence, the utmost cleanliness and process of disinfection are always the highlight of the industry.  

The disadvantage if the food processing company is negligent enough not to sustain the cleanliness of their food processing, the tendency of food contamination is high. When a client gets poisoned due to the ingestion of your food, they will file a complaint both criminal and civil against you aside from the move to have your food processing business closed for further operation. 

To ensure the cleanliness of your food processing facility and prevent the contamination of the food, it is highly recommended to avail the advantage of the Dynaco Slimline Stainless door in New Jersey and New York from Overhead Door Company of Eastern New Jersey Commercial, a division of DuraServ Corp. 

Dynaco Slimline Stainless door has been assembled using the stainless material. It was designed for a high-performance door that ensures a tight seal. It keeps a stable pressure to the door and it protects the storage area from the contaminants. One of the best attributes of the door is its airlock feature that corrects the pressure differentials. Moreover, the door has likewise been engineered for an energy-saving feature as it secures the door with a super tight seal feature against the contamination of food. Meaning, the contaminated air could not in any way penetrate inside the food processing area.

The following benefits of Dynaco Slimline Stainless door in New York are as follow:

·Keep open time to a minimum

·Rapid door cycle of up to 1,2 m/s open speed, 0,5 m/s close speed

·Conserve energy and reduce air leakage

·Patented side guides and superior seal design

·Control pressure levels

·Pressure resistant flexible PVC door curtain

·Restrict contaminants and airborne particles

·Full-perimeter door seal

·Keep employees and equipment safe

·No rigid elements to damage objects or injure staff

·Operate in silence

·Low-friction technology guarantees silent open/close 

The Dynaco Slimline Stainless high-performance door requires little maintenance in New York, due to its low-friction side guides, self-reinserting door curtain, and few wearing parts. With no rigid curtain elements, this flexible door is safe for staff and equipment.

Overhead Door Company of Eastern New Jersey, a division of DuraServ Corp, is East Jersey’s commercial door and operator provider for industrial applications. As an Overhead Door Company, we have access to the full line of Overhead commercial door products from rolling grilles to high-speed doors to beautiful glass aluminum doors. We have the right product to fulfill your needs. 

We are committed to making your food processing establishment contamination-free and the cleanest area you will ever experience. We have a wide array of products and Dynaco Slimline Stainless Dooris one of those. Also, our technicians are well-trained and they could surely install your door in the most efficient way to protect your food and provide you with a cost-effective fixture. Here are the other Dynaco High-Speed Doors we offer but not limited to:

·Dynaco Freezer M2

·Dynaco Dynarigid

·Dynaco M2

·Dynaco the Streamline 

For most loading dock businesses, one of the most dangerous parts of a warehouse and considered most neglected is the loading dock equipment. Loading dock equipment is not meant to last a lifetime of use, they can reach their limits too.    

Probably for most Lakewood facility managers, when it comes to loading dock safety issues, they focus much on the bigger facility concerns rather than on small issues like loading dock equipment such as loading dock levelers and other loading dock accessories.  

We at Overhead Door Company of Eastern New Jersey, a division of DuraServ, get a lot of questions from our clients about loading dock equipment problems, specifically about dock levelers, which has long been haunting them of costly repairs and maintenance issues. Here, we prepared an informative solution when your dock leveler shows signs of failure or damage that could affect the operation of your loading dock business in Lakewood.  

What is the main role of the loading dock in warehouses?

As warehouses are designed to have different sections to function as one whole working process, loading docks is one of the most vital and the busiest section.    

Loading docks allow safe and efficient unloading and loading of transport vehicles, trailers, or trucks. Products, goods, or items are being moved out and in of a facility to ensure fast and efficient delivery of shipment.  

Safety and accessibility in the movement of goods or products are highly prioritized. Loading dock equipment like dock levelers and its accessories helps ensure the safety of the workers and shipment of property.  

What is a dock leveler?

A dock leveler is a piece of equipment that creates a link or a bridge between transport vehicle, trailer, or truck and the building establishment. It allows for a forklift, pallet jack, or a person to load and unload any product, goods, or items.

Our Lakewood Dock Inspection Team offers several types of dock levelers products that would suit perfectly for your loading dock needs.

What are the types of dock levelers?

There are several types of dock levelers in the market, however, here are some common types used by most businesses:  

1. Mechanical Dock Leveler – The most common and most budget-friendly dock leveler, uses a mechanical spring system to raise the leveler usually in an upward position. Though no electrical power supply is required, they tend to be costly in terms of maintenance.  

If you’re a business owner, architect, contractor, or facility manager and needing a commercial door or operator, our Lakewood dock replacement’s team of experts can help you find the best fit for your application needs and requirements. Check out some of our Mechanical Dock Leveler models.

2. Air-Powered Dock Leveler – a dock leveler that uses a pneumatic bag system of some type to move up and down the leveler deck. This leveler uses electrical power sources and can be moderately expensive in terms of maintenance budgeting.

At New York Broken Dock Leveler, has the technical expertise and products to make your warehouse and docks safe and efficient. Whether you need a retrofit or for us to work with your architect for a new design, our experts have all the right products. Have a glimpse of our Air-powered Dock Leveler models.

3. Hydraulic Dock Leveler – uses a hydraulic cylinder to raise and lower its deck, at the same time used to operate the lip. They are more versatile compared to mechanical and air dock levelers, and typically has lower maintenance costs.  

Our Lakewood Dock Maintenance can provide the perfect loading dock solution and we work with the best names in the business like Wayne Dalton, TKO, Rytec, or Albany to combine the right product for your loading dock needs.

4. Specialty Dock Leveler – a type of dock leveler that can be available for specialty applications like truck levelers or barrier lip pit levelers. As an Overhead Door company, we have access to the full line of other Overhead commercial door products from rolling grilles to high-speed doors to beautiful glass aluminum doors. 

 Learn more about Specialty-Dock-Levelers click here.

 What to do when your dock leveler breaks down?

Most dock levelers are designed and engineered to last for years, but every product is not meant to last for a lifetime and will eventually break down and will need repair if it is used long enough. 

Here are some questions we encounter from our customers with some recommendations:

1. How come our dock leveler lip won’t stay out too long to get in the back of the trailer?

Commonly this happens when the dock leveler is misadjusted or it needs spring replacement. Contact your nearest loading dock leveler repair technician with dock parts for replacement and other services.

2. How come the lip won’t come out on our dock leveler?

Possibly, the lip assist is at fault or there is less tension on the springs. Better call in the professionals to do a loading dock inspection and repair.  

3. Whenever I push the button, my dock leveler makes a strange noise, where is this coming from?

For air-powered dock levelers, the issue is the motor, while for hydraulic levelers, commonly it is the hydraulic pump or low in hydraulic oil.

4. How come when I pull the chain, the dock leveler won’t come up?

This is a mechanical issue, where working springs are needed with the proper tension to operate. Either the springs are damaged or broken, or there isn’t enough tension in the springs. We recommend call-in a trained technician who specialized in broken dock levelers and can safely manage to keep the equipment functional without an accident.

5. Why does our dock leveler won’t stay down or sometimes it just pops up?

Usually, it is a mechanical issue with the hold-down. As mechanical leveler is powered by coiled springs, the spring tensions push the dock leveler upwards. The hold-down is part that controls the proper height of the leveler when not in use.

Possibly, either the ratchet, paw springs, or paws are damaged or failure that needs to be replaced. We suggest call-in the professionals with loading dock specialties and with dock leveler replacement parts ensure a one-day service transaction.

What company to trust when you need an emergency dock leveler repair in Lakewood?

 If you happen to be in Lakewood, the best option we can recommend is to choose the One-Stop-Shop for Commercial Door and Loading Dock Equipment provider - Overhead Door Company of Eastern New Jersey, a division of DuraServ Corp, since 2001, the largest distributor in the world for the leading manufacturers of dock equipment and hi-speed doors, and who has been serving all of New Jersey, Lakewood, and surrounding areas.

Our dock repair team in Lakewood can assess your dock leveler repair problems and in many cases have your dock equipment functional within a few short hours. Our service department stands ready 24/7 available, all year round.

OEM Parts and Accessories

Minimize Downtime

Maximize Productivity

Stock Inventory

Parts and Availability

Learn more about us at 609-642-4864, or through our website, for any questions about our dock levelers or any loading dock equipment needs such as commercial doors, safety equipment, and truck restraints, dock leveler and lifts, aftermarket products, dock seals and shelters, and industrial fans in Lakewood.

Of the several equipment and devices that comprise a loading dock, a dock leveler is one that plays a huge role in your operation.

Dock levelers are stable equipment in a warehouse and perform a critical function.  It requires handling with the same level of care as other loading dock equipment and devices.

Why is dock leveler important?

You should be fully aware of the importance of dock levelers. The majority of the industries and loading bays are using this equipment to let the operations run easy, safe, and fast. Dock levelers are highly functional because of its feature-rich specifications and functionalities.

In most cases, your dock bay will not coincide with the height of all trucks that serve your loading zone, which is why dock levelers are essential.

Dock levelers can create a permanent part of the dock, thus bridging the gap between the dock and the truck or the warehouse floor at the same time.

When it comes to loading docks in New Jersey, Overhead Door Company of Eastern New Jersey, a division of DuraServ, is the leading service provider in the loading dock, door, and equipment industry in New York and New Jersey. We can deliver service on a national scale to customers with large facilities.

To learn more about our dock levelers and lifts, click here.

What are the types of levelers?

Dock levelers can function in several different ways, with different benefits and drawbacks for your loading dock business. Essentially, there are three types of dock levelers such as mechanical, hydraulic, and air units:

1. Mechanical Dock Levelers – consist of a series of springs and levers that can be manually operated to raise the loading platform and extend the lip assembly. Then the leveler is manually positioned to bridge with the delivery truck bed.

least expensive leveler

slower to operate

more maintenance

need regular adjustment to the hold-down system

Our New Jersey dock repair, has access to the full line of Overhead commercial door products from rolling grilles to high-speed doors to beautiful glass aluminum doors. We have the right product to fulfill your loading dock needs.

We have several types of Mechanical Dock levelers for you to choose from.

2. Hydraulic Dock Leveler – are designed structurally similar to mechanical levelers, however, powered by hydraulic cylinders to raise the platform and extend the lip assembly to bridge the gap between the docking bay and the trailer or transport vehicle.

easier to maintain

faster to operate than mechanical levelers

more expensive

safer and easier to maintain

At our New Jersey Dock Replacement, we have the technical expertise and products to make your warehouse and docks safe and efficient. Whether you need a retrofit or for us to work with your architect for a new design, our experts have all the right products.

To get to know how our Hydraulic Dock Leveler can help your loading dock business, get a glimpse.

3. Air Powered Dock Levelers – Air-powered dock levelers make use of an airbag to automatically raise and lower the platform.  

simple yet effective

easiest to maintain

eliminates messy hydraulic fluids and leaks

At New Jersey dock lock repair Team, are factory trained and fully qualified service technicians- some with over 25 years of experience. We work around the clock to keep your doors and dock equipment up and running.

Let our Air-Powered Dock Levelers and our Specialty Dock Levelers save you from the hassles of unproductive work downtimes and expensive maintenance costs.

If a dock leveler is not working properly, how will it affect the loading dock operation?

Dock levelers empower an easy and smooth sailing transition between the trailers and docks. If a dock leveler is damaged or in need of unexpected repairs, the loading dock operations will stop, the whole company supply chain will result in the following:

losing your worker productivity

delays in the transition of goods, products or items

long delays will create productivity downtimes

costly maintenance repairs

low morale of workers

potentially hinder vendor relationships

eventually company profit losses  

Our New Jersey Dock Lock Replacement Team is available 24/7 with Parts and Services. We have a Team of knowledgeable coordinators to take your call.

Full fleet of service and installation trucks

Fully stocked warehouse

Team of factory trained and fully qualified service technicians

For more information and details about our 24/7 with Parts and Services.

Why Contact a Professional Dock Leveler Repair Service?

Keeping your dock leveler may seem insignificant. However, failure to keep up with maintenance of this piece of equipment is threatening the company's bottom line.

Our New Jersey dock maintenance and New Jersey dock inspection Service Team can do regular check-ups and repairs of your equipment and keep them running as they are designed, and operating at full capacity which will result in:

increase operational reliability and efficiency

longer life of the equipment

lessening equipment malfunctioning

lowering costly downtime

lowering of long-term repair expense

safe working environment

big company savings

Overhead Door Company of Eastern New Jersey, a Division of DuraServ, the largest distributor in the world for the leading manufacturers of dock equipment and hi-speed doors, is East Jersey’s commercial door and operator provider for industrial applications.

Whether you need a retrofit or for us to work with your architect for a new design, our experts have all the right products. You can contact us at 609-642-4864, or through our website.

Our New Jersey broken dock leveler Team can provide expert service and repair of commercial and industrial door systems. ​Our well-stocked fleet of service vehicles and expertly trained technicians will keep your dock systems operating safely.

You may request for a service request, or personally visit us at service areas: New Jersey, Jamesburg, Edison, Union, Cranbury, Lakewood, South Plainfield, NJ, and New York.

Of the several equipment and devices that comprise a loading dock, a dock leveler is one that plays a huge role in your operation.

Dock levelers are stable equipment in a warehouse and perform a critical function.  It requires handling with the same level of care as other loading dock equipment and devices.

Why is dock leveler important?

You should be fully aware of the importance of dock levelers. The majority of the industries and loading bays are using this equipment to let the operations run easy, safe, and fast. Dock levelers are highly functional because of its feature-rich specifications and functionalities.

In most cases, your dock bay will not coincide with the height of all trucks that serve your loading zone, which is why dock levelers are essential.

Dock levelers can create a permanent part of the dock, thus bridging the gap between the dock and the truck or the warehouse floor at the same time.

When it comes to loading docks in New Jersey, Overhead Door Company of Eastern New Jersey, a division of DuraServ, is the leading service provider in the loading dock, door, and equipment industry in New York and New Jersey. We can deliver service on a national scale to customers with large facilities.

To learn more about our dock levelers and lifts, click here.

What are the types of levelers?

Dock levelers can function in several different ways, with different benefits and drawbacks for your loading dock business. Essentially, there are three types of dock levelers such as mechanical, hydraulic, and air units:

1. Mechanical Dock Levelers – consist of a series of springs and levers that can be manually operated to raise the loading platform and extend the lip assembly. Then the leveler is manually positioned to bridge with the delivery truck bed.

least expensive leveler

slower to operate

more maintenance

need regular adjustment to the hold-down system

Our New Jersey dock repair, has access to the full line of Overhead commercial door products from rolling grilles to high-speed doors to beautiful glass aluminum doors. We have the right product to fulfill your loading dock needs.

We have several types of Mechanical Dock levelers for you to choose from.

2. Hydraulic Dock Leveler – are designed structurally similar to mechanical levelers, however, powered by hydraulic cylinders to raise the platform and extend the lip assembly to bridge the gap between the docking bay and the trailer or transport vehicle.

easier to maintain

faster to operate than mechanical levelers

more expensive

safer and easier to maintain

At our New Jersey Dock Replacement, we have the technical expertise and products to make your warehouse and docks safe and efficient. Whether you need a retrofit or for us to work with your architect for a new design, our experts have all the right products.

To get to know how our Hydraulic Dock Leveler can help your loading dock business, get a glimpse.

3. Air Powered Dock Levelers – Air-powered dock levelers make use of an airbag to automatically raise and lower the platform.  

simple yet effective

easiest to maintain

eliminates messy hydraulic fluids and leaks

At New Jersey dock lock repair Team, are factory trained and fully qualified service technicians- some with over 25 years of experience. We work around the clock to keep your doors and dock equipment up and running.

Let our Air-Powered Dock Levelers and our Specialty Dock Levelers save you from the hassles of unproductive work downtimes and expensive maintenance costs.

If a dock leveler is not working properly, how will it affect the loading dock operation?

Dock levelers empower an easy and smooth sailing transition between the trailers and docks. If a dock leveler is damaged or in need of unexpected repairs, the loading dock operations will stop, the whole company supply chain will result in the following:

losing your worker productivity

delays in the transition of goods, products or items

long delays will create productivity downtimes

costly maintenance repairs

low morale of workers

potentially hinder vendor relationships

eventually company profit losses  

Our New Jersey Dock Lock Replacement Team is available 24/7 with Parts and Services. We have a Team of knowledgeable coordinators to take your call.

Full fleet of service and installation trucks

Fully stocked warehouse

Team of factory trained and fully qualified service technicians

For more information and details about our 24/7 with Parts and Services.

Why Contact a Professional Dock Leveler Repair Service?

Keeping your dock leveler may seem insignificant. However, failure to keep up with maintenance of this piece of equipment is threatening the company's bottom line.

Our New Jersey dock maintenance and New Jersey dock inspection Service Team can do regular check-ups and repairs of your equipment and keep them running as they are designed, and operating at full capacity which will result in:

increase operational reliability and efficiency

longer life of the equipment

lessening equipment malfunctioning

lowering costly downtime

lowering of long-term repair expense

safe working environment

big company savings

Overhead Door Company of Eastern New Jersey, a Division of DuraServ, the largest distributor in the world for the leading manufacturers of dock equipment and hi-speed doors, is East Jersey’s commercial door and operator provider for industrial applications.

Whether you need a retrofit or for us to work with your architect for a new design, our experts have all the right products. You can contact us at 609-642-4864, or through our website.

Our New Jersey broken dock leveler Team can provide expert service and repair of commercial and industrial door systems. ​Our well-stocked fleet of service vehicles and expertly trained technicians will keep your dock systems operating safely.

The Food and Beverage Processing Business needs high-performance engagement because the delivery and distribution of food products are frequently undertaken. 

 Since this processing business is flourishing in New Jersey, a facility should consider installation of a New Jersey high speed door to complement the fast phase business engagement, the use of a  New Jersey high performance door will also be fit to a food and beverage processing operation. 

 Why Food and Beverage Processing is important?

Food is an essential need of human beings but food and beverage are perishable goods that should be delivered and distributed promptly to prevent spoilage.

 What type of High-performance door is required for cold storage of Food and Beverage?

Typically, the frequency of a freezer opening and closing is at moderate to high level, that being said, a sliding door would be an appropriate choice at a food facility, a great option is the Hercules Horizontal Sliding.

 That being said, a sliding door would be an appropriate fixture for this purpose such as the Hercules Horizontal Sliding.

 What are the design highlights of a Hercules Horizontal Sliding?

The Hercules horizontal sliding door New Jersey has been designed for a fast opening and closing application and it is suitable for coolers and freezers. 

When the management of the facility does not have the budget for this kind of door, the manufacturer facilitates the assembly of both the electric and the manual operation to give an option to the users. Available with electric or manual operation. 

 What are its benefits and other applications?

The use of the Hercules Horizontal Sliding Door is beneficial to the Food and Beverage Processing Facilities because the delivery and distribution of the perishable products are smooth, fast, and continuous due to its high-performance quality.

 Apart from the coolers and freezers, this door is also best for warehouses and industrial buildings where the materials handling equipment and such other similar sets of heavy-machinery are being operated such as the forklifts and pallet jacks.

 Where do you purchase a Hercules Horizontal Sliding door in New Jersey?

 If you are in need of the Hercules Horizontal Sliding Door, you may get it from Overhead Door Company of Eastern New Jersey Commercial, a division of DuraServ Corp. Not only we distribute this door type, but we have the commercial door parts & service availability.

 We have full access to the Overhead commercial doors to cover the rolling grilles to high-speed doors and even to glass aluminum doors. 

 We strongly recommend the installation of the Hercules Horizontal Sliding Door if you are managing a Food and Beverage Processing Business because this is truly designed for this application.

 To ensure availability of the best suited door for your business, we have professional technicians to help you find the perfect door for your needs.

 We distribute several types of high-speed and high-performance doors for the warehouse industry.

Our technicians are highly skilled and they install commercial and industrial doors with the utmost safety and security.

 Further, our technicians are highly skilled and they install the commercial and industrial doors properly for the utmost safety and security. 

 Furthermore, we also offer other relevant services such as New Jersey Door repair, New Jersey Door replacement, New Jersey Broken door spring, and New Jersey Door maintenance we have a 24/7 repair service and spare parts availability.

 If you have questions or concerns, please feel free to contact us at 609-642-4864.

 You may send us your service request online and we will promptly respond to you the soonest possible time. 

How Often Should You Schedule Professional Maintenance For Commercial Roll Up Doors?

Nowadays, commercial and industrial roll-up doors are becoming a popular choice for businesses because of its several modern-day practicality benefits.  One of those reasons for such its in-demand status is its versatility. Roll-up doors can be customized in several ways that can be a total solution to suit such specific needs. 

What are the benefits of roll-up doors?

Commercial and residential roll-up doors are the favorite choice by most business owners and homeowners because they offer many practical benefits such as:

Strong-built doors

Superb Insulators   

Security

Easy to Use

Total space saver

Aesthetic Appeal

Ability to block unwanted noise outside

Highly durable against outside elements 

One of those great companies who has been carrying roll-up door products for many years is Overhead Door Company of Eastern New Jersey, division of DuraServ Corp, which is East Jersey’s commercial door and operator provider for industrial applications and has employees whose tenure is 40+ years in the business. They have some of the most experienced and knowledgeable people in the dock and door industry.

What are the Roll-Up Door Applications?

Roll-up doors have long years been providing commercial, residence, governmental and industrial entities in all their certain needs. It is an equipment that is strong, safe, good-looking, simple to use, and easy to maintain that functions in a productive manner. Below are some lists of applications where roll-up doors are being used:

Warehouse Facilities

Stadiums & Restaurants

Colleges and Universities

Fashion & TV Studios

Hospital & Medical Facilities 

Multi-Family Residential Buildings

Freight Depots, Shipping Facilities, E-Commerce Distribution Sites 

Airports & Seaports, Municipal, Courthouses, Police & Corrections, Government Facilities 

Pharmaceutical & Bio-Tech Companies, Pharmacies, Laboratories

Grocery Stores, Dairy, Bakery, Seafood, Vegetables, Food & Beverage Manufacturing

Overhead Door Company of Eastern New Jersey’s team of experts can help you find the best roll-up door fit for your application needs and requirements. Below are some of their commercial rolling steel doors models for you to choose from:

Overhead Door- Fireking 631 Series- Rolling Steel Fire Rated Service Door

Overhead Door - Fireking 634 Series – Rolling Steel Fire Rated Service Door

Overhead Door- Fireking 630 Series- Insulated Rolling Steel Fire Rated Service Door

Overhead Door- Fireking 630 Series- Rolling Steel Fire Rated Service Door

Overhead Door- Model 600 Coil-Away Rolling Steel Service Door

Overhead Door- Model 610 Rolling Steel Service Door

Overhead Door- Model 620 Stormtite Rolling Steel Service Door

Overhead Door- Model 625 Stormtite Insulated Rolling Steel Service Door

Overhead Door- Model 640 Rolling Fire Counter Door

Overhead Door- Model 641 Stainless Steel Rolling Fire Counter Door

Overhead Door- Model 660 Integral Frame Rolling Fire Counter Door

Zap Operator Model 825

What is Preventive Maintenance?

Preventive maintenance is maintenance that is routinely or regularly performed on equipment or device to reduce the risk of failure or future damage. For roll-up doors, it is performed while it is still working normally so it does not break down unexpectedly.

Preventive maintenance is important for several reasons:

Improved door operational efficiency and reliability 

Lowers long-term repair expenses

Lessens costly downtime

More life years of your doors 

The Importance of Preventive Maintenance Program

Most commercial doors and industrial doors are overused and neglected of their conditions. There are also other commercial garage doors that are designed to weight more than half of a ton, such that to imagine the potential danger it would pose if it makes a free-fall failure to your facility workers. 

The best-case sample is the Overhead Door- Fireking 630 Series- Insulated Rolling Steel Fire Rated Service Door model. Designed and engineered as a part of a passive fire protection system to minimize the spread of fire and smoke between separate structures and to enable safe access and give more time for people to stay away from such structure.   

The 630 Series rolling steel fire door is designed for masonry mounted applications including: 

warehouses

file rooms

public record storage

material storage locations

facilities with paint booths

shared walls between businesses

public buildings such as libraries

Key highlights include a feature having a mechanical auto resettable hoist (non-motorized) that enables easy drop test and reset of the fire door in just seconds. Fusible links are mounted on both sides of the wall that separate to automatically close the door in case of fire.

Even though 630 Series rolling steel fire door is one of the best fire rated roll-up door models, it can have flaws too. What if the 630 Series door does not have a preventive maintenance program and fire broke unexpectedly, one cannot imagine the cost of negligence, incompetence, violation of safety protocols and so forth, possibly for some companies it would cause a ‘head to roll’, or even worst a near-bankruptcy company due to a legal crisis.    

How Often Should You Schedule a Professional Maintenance?

In reality, the frequency of maintenance services depends on its usage, working environment, and other conditions of your door’s operation. Some programs have monthly schedules, while others have every three to six months.

Since the scheduling depends on what your door needs, Overhead Door Company of Eastern New Jersey can offer their services and products to help you with your commercial roll-up door’s maintenance services at our New Jersey door repair, New Jersey door replacement, New Jersey broken door spring, and New Jersey door maintenance Service Areas Offices.

Overhead Door Company of Eastern New Jersey:

BEING YOUR ONE STOP SHOP FOR COMMERCIAL DOOR AND LOADING DOCK EQUIPMENT INCLUDES 24/7 PARTS AND SERVICE.

Full fleet of service and installation trucks

Fully stocked warehouse

Team of factory trained and fully qualified service technicians – some with over 25 years of experience

Team of knowledgeable coordinators to take your call

We work around the clock to keep your doors and dock equipment up and running. For service, contact any of our local branches, or use our toll-free main number: 609-642-4864.

PLANNED MAINTENANCE PROGRAM

Protect Your Investment

This program is built on a professional, no-cost, and no- obligation survey conducted by our team of factory-trained and experienced technicians. Regular checks of your equipment keep them running as they are designed.

Reduce Lifetime Ownership Costs – The best, most cost-effective maintenance is to eliminate a problem before it happens. Select a frequency that meets your business needs.

OEM PARTS AND ACCESSORIES

Minimize Downtime

Maximize Productivity

Stocked Inventory

Parts Availability

Through APS Resource, we offer ready access to a broad inventory of aftermarket parts and accessories to help you maintain a clean, efficient, and safe dock operation.

For more information and other details, please contact 609-642-4864, or through our website.

What are the Negative Effects of Summertime Heat on Improperly Prepared Loading Docks in New York?

The architectural structure of a warehouse is sealed with usually substandard exhaust equipment for ventilation. This is a regular structure foremost to protect the goods especially if you are managing a distribution center where most of your goods are perishable.

Most of the warehouses in New York utilize the Heat Ventilating and Airconditioning (HVAC) System to anticipate any type of temperature in line with the needs of the goods being stored. To this end, the management undertakes to facilitate the regular New York Dock inspection to identify the issues and perform the needed New York Dock repair and New York Dock replacement.

However, not all loading dock facilities have complete sets of equipment including the ventilation equipment. It is therefore a risky workplace during the summer season as the work condition of the workers will surely be put in danger.

What is the danger of Heat in Loading Docks?

When the temperature in the loading dock exceeds the regulated coldness or warmth, it will typically spoil the perishable goods to the disadvantage of the management. Apart from that, the high and low internal temperature may pose a danger to the health of the workers especially if a number of the workers have irregular blood pressures and other ailments that may be aggravated due to the hot internal temperature.

This may result in health issues such as but not limited to the following:

Workers may faint due to heat collapse. This transpires during the hot working condition due to the lack of circulating oxygen in the brain. Workers may suffer from heatstroke. This is deemed a very serious and critical health problem that may lead to death.

Workers may experience heat cramps. These cramps are experienced during the performance of hard labor where too much muscle exertion is being applied and profuse perspiration is experience and the workers failed to hydrate. In short, workers may suffer from hearing cramps due to the lack of salt in the body.

The signs of may vary but exposure to hot temperature may have the following signs:

increases your pulse rate,

strains the heart, and

in severe cases may cause a life-threatening heat stroke

What are the solutions to resolve this problem?

There are provisional and permanent solutions to the problem. Provisional solutions may include the conduct of proper and timely information and education campaigns to provide the correct information to the workers for the latter to get prepared.

Workers may wear appropriate T-shirts and bring along drinking water to somehow facilitate the body coolness and hydration.

On the other hand, a permanent solution may highly be recommended and that is to undertake the improvement of the warehouse structure and add important equipment for ventilation such as the installation of the industrial fans. Moreover, it may also be advised to utilize the energy-saving products to the facility.

Aside from that, it is likewise a wise action to undertake the New York Dock lock repair and New York Dock lock replacement to upgrade your dock system and the workers working conditions to a higher and safer level.

In cases of New York ripped dock seal, New York damaged dock shelter, and New York broken dock leveler, it is strongly recommended to undergo a New York replacement dock seal, shelter, and leveler.

That being said, it is therefore very vital to perform a New York dock maintenance not only to increase your facility’s productivity but also you considered the safety and security of your personnel to affect profitability.

Finally, the installation of the industrial fans is very important to facilitate ventilation like:

Serco ATEC HVLS Fans – It is designed to move a lot of air and much more.

Serco ATECT Fan – It has improved airflow and energy-saving features not to mention the powerful blade design that functions without stress to the building.

Kelly ATEC HVLS Fan – It moves to generate more air but this high-volume low-speed fan doesn’t do more than this.

C-class Commercial Fan – This fan is a completely customizable Entrematic C-Class commercial fan.

If you are in New York, it is highly recommended to avail of the services of Overhead Door Company of New Jersey, a division of DuraServ Corp. We have free and prompt access to the full array of Overhead commercial and industrial products such as fans including rolling grilles to the roll-up high-performance doors.

Aside from the high-quality and durable line products, we also invest to train our professional technicians to ensure that all installations and assembly of equipment will be smooth, safe, and operational.

We the best company to install energy-saving dock equipment and repair service in the New Jersey area and the adjacent areas.

For more information about our industrial fans and energy-saving products, please visit our official pages for the complete details.

For your needs about the industrial fans and other loading dock equipment, maintenance, and repair, you may contact us at telephone number 609-642-4864. If you wish to contact us online. Moreover, you may even send us your service request.

6 Reasons Why Do Scheduled Maintenance Service on Commercial Doors in Edison, NJ

Industrial and commercial roll-up doors are becoming a popular choice for many businesses because of their multiple benefits. An industrial or commercial door is a substantial asset and an integral part of a home or business. Since it’s an important part of your business, having regular preventative maintenance will allow you to run your facility without downtime.

 Just as having your oil changed helps your car run smoothly and having your teeth cleaned helps keep your mouth healthy, regularly scheduled maintenance on your commercial rolling steel doors, commercial sectional doors, knockout doors, and high-performance doors can improve its life and performance. Preventive maintenance is a simple way to protect your investment. 

 Let’s discuss further why you need to have scheduled maintenance service on your commercial doors in Edison, NJ. 

 ·         Decrease in Costly Downtime

Preventative maintenance for your commercial door is focused on keeping your commercial doors in peak condition at all times, instead of only performing maintenance in response to a needed repair. Among other things, this includes keeping the track surfaces of the commercial door clean and free of obstructions, grease, and oil, making certain bolts and fasteners are correctly tightened, and addressing any damage or wear and tear which has occurred over time. Choosing preventative maintenance for commercial doors can help to avoid the worst disasters, saving your business precious time.

 ·         Increased Operational Efficiency and Reliability of your Commercial Doors

The more that equipment operates incorrectly, even if it’s usable, the more it’s unsafe and likely to break down. Having your commercial doors checked regularly will definitely increase its operational efficiency and reliability. This will give you confidence that your commercial doors will give you better efficiency and productivity.

 ·         Inspect and lubricate all Parts

Bolts, rollers, and other door parts, regardless of material, need to be inspected twice per year and replaced every 7 years. If any chips, broken door spring, excessive wear, or cracks are detected, these parts should be replaced immediately. Regular maintenance can detect any serious damage before it could happen.

 ·         Prolongs Commercial Door Lifespan

Commercial doors include several elements that can be under high spring tension, including bottom fixtures, cables, drums, pulleys, shafts, and brackets and only trained service personnel should attempt repairs to these items. Winding, repairs, and spring adjustments must also be completed by trained service professionals. In addition to these door repairs and adjustments which can only be completed by trained professionals, it’s also wise to have a professional technician perform regular preventative maintenance because professional technicians have extensive experience in identifying the potential for problems before they have a chance to occur. 

 ·         Extended Safe and Useful Life of your Commercial Doors

Your employees and workers expect a safe work environment, and the added benefit is that a safe workplace is a productive workplace. Safety is very important in all workplaces. Having your commercial doors kept in shape will give you peace of mind. Less to no accidents can happen once your commercial doors are checked regularly.

 ·         Decrease in long-term repair expenses.

One of the primary benefits of preventative maintenance is that it reduces long-term costs by reducing severe malfunctions and downtime with your commercial doors. While investment is required for preventative maintenance, this is very affordable when compared to the cost of an extensive commercial door repair or commercial door replacement. Regular preventative maintenance saves you time and money over the years of use you will get out of your commercial doors.

 Overhead Door Company of Eastern New Jersey Commercial strongly recommends a regularly scheduled preventative maintenance plan for your industrial and commercial doors.  Our preventative maintenance plans improve operational efficiency, safety, and reliability.  Overhead Door Company of Eastern New Jersey Commercial’s preventative maintenance not only decreases costly downtime by preventing some types of industrial door malfunctions, it can also decrease repair expenses over the long term. Scheduling commercial doors maintenance regularly reduces the need for emergency repairs to commercial doors in Edison, NJ.  

How an Efficient Loading Dock System Keeps the Supply Chain Moving in New York

Do you know how were you able to get your food on the table? Not just how you bought that food from a grocery store or any food establishment, but the know-how of the supply chain processes involved? Unknowingly to most Americans, the food supply chain system is a highly complicated system that involves processing and manufacturing to distribution, also applies to other areas of applications such as beverages, pharmaceuticals, and our daily necessities.      

 Nowadays, loading dock companies across the United States are upgrading their warehouses in compliance with new governmental regulations as being imposed. Besides, other companies are taking in advance a step further by anticipating future regulations like safety, security, and loading dock issues to the next level by using some state-of-the-art solutions to address the efficiency in loading docks.  

 Most good loading dock companies like Overhead Door Company of New Jersey, a division of DuraServ, the largest distributor in the world for the leading manufacturers of dock equipment and hi-speed doors, now offers these ideas to go one better and playing ahead in the business game of loading docks. 

 ·         Advance awareness and familiarization of government initiatives

 It’s 2020, it pays well to know in advance. Be wary of federal government initiatives from agencies like Food and Drug Administration; Federal Motor Carrier Safety Administration; U.S. Department of Agriculture’s Food Safety and Inspection Service; and even the Department of Homeland Security. 

 Certain programs and guidelines affect the supply chain and direct certain needs to reinforce and uphold new rules and regulations.

 ·         Re-evaluate security systems and protocols

 Most company’s think outside of the box, hiring third party consultants testing how good or bad their security systems works. They even come to the unthinkable point to let them be ‘robbed’, in that way they may know, study, and ‘feel’ the strengths, and weaknesses of their security protocols. By checking and re-evaluating your security systems you will ensure company assets such as dock levelers, restraints, loading dock lifts, loading dock seals and shelters, and HVLS fans are in good hands with peace in mind.  

 ·         Protecting the trailers using restraints

 During the unloading and loading process, use vehicle restraints to safeguard against thievery. Loading dock safety equipment like Overhead’s Serco Pit-Bull Truck Restraint Model Sl90 can be attached to the trailers to keep them separated and avoiding any trailer creeps which will lead to accidents or hazards. Another, the safety device also prevents trailer hijacking. It is connected to the facility building with an alarm system, if released without authorization the alarm sounds ‘on’ to alert the facility workers and the authorities.    

 ·         Safeguarding facilities with seals and enclosures

 Choose the right seals and enclosures to ensure it is protected from outside elements and guarding against energy loss during the loading and unloading. Overhead’s Serco S600 Dock Seal w/ fixed head pad, are the ideal choice seals that can provide a positive seal between internal and external environments, and maximum security level of protection. 

 ·         Improve Lighting Visibility

 Better visibility inside the trailer dock area will improve productivity and avoid accidents or hazards from happening. Try the High Impact LED™ Dock Light from APS Resource, which delivers a maximum light output that can be mounted remotely or easily retrofitted to existing dock arms.

 ·         Improve employee welfare

 Comfortable employees are productive employees. Good and properly well ventilated warehouses protect the health of employees against sickness and hazardous working environments. Use Overhead’s SERCO ATEC HVLS Fans, high-volume/low-speed industrial fans to provide healthy air circulation and safeguarding the facility’s working conditions keeping employees warm and dry during cold, wet weather.

 ·         Use advanced technology 

 Gone are the days of manual operation, using push-button loading dock levelers are the latest trends.  By upgrading your loading dock equipment like Overhead’s Hydraulic Dock Levelers or Air Powered Dock Levelers, it will speed up workload efficiencies and lessen the maintenance costs, and gain big dollar savings. 

 While not all chain systems are created the same, an advanced and systematic approach from the start of the loading dock operation till the end process will almost always have good results of having an efficient loading dock system. Considering these systems has many factors and elements involved, knowing how, implementing, and working together systematically will improve the integrity of the overall supply chain in New York.  

 Overhead Door Company of Eastern New Jersey, a division of DuraServ Corp, is East Jersey’s commercial door and operator provider for industrial applications, which can help you make your loading dock system efficient and improve the company bottom line at our loading dock New York, and loading dock New Jersey.

 Call us today at 609-642-4864, or through our website.

 We have the technical expertise and products to make your warehouse and docks safe and efficient. Our Middlesex County branch serves as the home of many medical, pharmaceutical, and manufacturing companies. From our headquarters in Jamesburg, NJ, Overhead Door Company of Eastern New Jersey is poised to serve all of New Jersey, New York, and surrounding areas.

Numerous business sectors seem to oversee just how significant the temperature is, within facilities or warehouses.  Depending on what type of warehouse you would most likely put up, it will cover all your stocks and goods which is essentially the mainframe of your business – without the product, you don’t have a business. Regardless of what you are storing in the warehouse, having a specific temperature, and keeping it stable, is inevitably vital.

 It can prove intimidating to decipher precisely where savings can be push through when it comes to keeping warehouse temperature, and then, what is the best solution for your site?

 With some simple but effective tips, you can not only save yourself money but can also elevate the efficiency of your warehouse. Here are some handy tips on how you can maintain and check the ideal warehouse temperature requirements:

 Tip No.1: Implement Temperature Monitoring

 Observe closely the temperature systems of your warehouse. The system should be able to detect automatically for any alert levels exhibiting beyond normal values required like internal temperatures dropping out of the required zones and other hazardous levels. Other systems record temperature logs for safety and health requirements.    

 Tip No.2: Good Insulation

 Insulated door’s energy loss through them could be important when you consider the amount of wall space that they could use. Consider all your choices and the insulation values of warehouse doors on offer prior to making a final judgment - the cost savings are essential. 

 Insulated rolling service door helps to create a comfortable environment for your staffers within your warehouse. An insulated door ensures that the temperature in your warehouse stays a moderate and normal temperature, which not only makes for a pleasant and convenient environment for your workers but also keeps any products in your warehouse at a safe and ideal temperature.

 Tip No.3: Oversee Temperature Levels

 Proper management and gaining control of your warehouse temperature level is essential. Temperature zones vary, for food storage warehouses they have three temperature zones namely ambient, cooler and frozen, while other larger facilities only have ambient and refrigerated temperature zones. Managing temperatures effectively is important especially with several elements involved such as dock seals and shelters, cold storage curtains, high-speed doors, and air doors. 

 Tip No.4: Closing the Door

 One of the most obvious enormous loads on air conditioning is infiltration, the leakage of outdoor air into a conditioned space. Infiltration is not only costly on blast freezers, cold-storage warehouses, and walk-in coolers but also could make an uncomfortable and inconvenient workplace for employees all throughout of summer season or even winter. Rolling steel service doors and commercial rolling steel doors are essential for any facility, or warehouse who are trying to maintain a strict interior temperature and at the same time lowering the energy costs.

 When you are at Edison, NJ implementing elements such as commercial rolling steel doors Edison NJ, Stormtite insulated rolling steel service door Edison NJ, high-speed doors, and dock seals are a great start to managing temperatures effectively. 

 You can order the mentioned products at Overhead Door Company of Eastern New Jersey Commercial, a division of DuraServ, the largest distributor for the foremost manufacturers of service and equipment in all of New Jersey, New York, and surrounding areas. We have access to the full line of Overhead commercial door products from rolling grilles to high- speed doors to beautiful glass aluminum doors. We have the right product to fulfill your needs.

 One of our product offers is Overhead Door- Model 625 Stormtite Insulated Rolling Steel Service Door. This Overhead Door-Model 625 Steel Service Door is an insulated rolling service door and have heavy-duty features insulated slats in a variety of materials - galvanized steel, stainless steel or aluminum, an ideal choice for applications requiring a moderate level of thermal protection.

 Overhead Door-Model 625 Stormtite Insulated Steel Service Door has several features which include:

 ·         Designed in sizes up to 30’ wide and 28’ high (9144 mm and 8534 mm)

·         Doors are constructed with a CFC-free, foamed-in-place polyurethane insulation

·         Vinyl weatherstripping on the bottom bar, exterior curtain side guide, and hood baffle provides additional protection against air infiltration

 Contact us now at Overhead Door Company of Eastern New Jersey Commercial at 609-642-4864, or through our website at http://bit.ly/ohdnewjersey-contact-us.

Industrial and commercial facilities are getting popular in Jamesburg, New Jersey, which in effect popularized the establishment of the warehouses. To this end, a massive influx of employment opportunities is being populated to cater to those who are in need to get hold of a decent job.

As more people are employed in industrial and commercial facilities, the rate of work-related accidents also soars in number. This is because of the use of low-quality loading dock equipment that usually causes the occurrence of the mishaps. A few of the best recommendations to be considered are the utilization of the high-quality loading dock equipment, the use of the safety equipment and the truck restraints. The loading dock is the core of these facilities and it should be amplified by the use of the high-end dock equipment such as the levelers, shelters, seals, barriers, high-speed overhead doors, safety equipment, and truck restraints. The most common cause of mishaps in warehouses are accidents related to safety equipment and truck trailer accidental unlocking of break devices while unloading and loading of goods to and from the storage areas. By purchasing your truck restraints from us, you will be able to protect your workers throughout dock operations in Jamesburg, NJ. To ensure the safety of your workers, it is strongly advised to get hold of the products and services of Overhead Door Company of Eastern New Jersey Commercial, a division of DuraServ Corp. We are a commercial and operator provider for industrial applications that offer truck restraints and other safety equipment services. We are the biggest distributor of Serco, Kelly, and APS products like the truck restraints and they are as follow:

·         Serco SLP3000 Recessed Vehicle Restraint

·         Serco Pit-Bull Truck Restraint Model Sl90

·         Serco Pit-Bull Truck Restraint Model SL40

·         Serco Pit-Bull Truck Restraint Model SL10

·         Serco Pit-Bull Truck Restraint Model SL20

·         Serco Pit-Bull Truck Restraint Model SL60

·         Serco Pit-Bull Truck Restraint Model SL70

·         Serco Pit-Bull Truck Restraint Model SL80

·         APS-2000 Truck Restraint

·         Kelley Model Star-4 Automatic Truck Restraint

·         Kelley Model Hidden Hook Recessed Truck Restraint

·         Kelley Model Star-2 Mechanical Truck Restraint

·         Kelley Model Star-1 Mechanical Truck Restraint W/ Led

·         Kelley Model Star-1 Mechanical Truck Restraint

 If you are in Jamesburg, NJ, you may consider the above-mentioned equipment to ensure your facilities safe work areas. There are lots of facility owners who opted to get hold of the cheap dock equipment. Worse, the equipment installations are also undertaken by unskilled and/or unprofessional technicians. Due to these facts, the number of accident occurrences is getting higher not to mention the higher costs of maintenance and repair fees. For your needs about truck restraints, safety equipment, loading dock equipment, truck restraints Jamesburg NJ, safety equipment Jamesburg NJ, Serco Pitbull truck restraints, Kelly Truck restraints, APS truck restraint, you may visit our official website to learn more details at https://bit.ly/ohdnewjersey-truck-restraints.

Generally, people would think about locks, bars, alarms, and uniformed guards when they think about safety security. While these countermeasures are by no other means the only precautions that are needed to be considered when trying to secure a system, they are a perfectly logical setting to begin. Physical security is important in any security plan, without it user access security, software security, information security, and network security are difficult to establish. 

 When a high security facility is the name of the game, high performance doors Jamesburg NJ are the experts you want on your team. Ultra-high-speed doors and high performance doors, that can open and close with no lag time virtually eliminate unauthorized, “tag along” access. When access and exit need to be strictly controlled, let the said company secure your premises with the following machine protection that they offer:

 Hormann-Flexon Machine Protection is used to separate personnel & equipment effectively in a high-security facility. For interior door openings up to 10’0” wide x 10’0” high, this machine protection doors provide peace-of-mind to personnel working in close proximity to production lines, equipment and processes. 

 Having a speed of 80” per second on the Speed-Commander™ 1400 MP and up to 60” per second on the Speed-Master® 1600 MP (30” per second closing speed both models) increases productivity and output results. Additionally, both uses standard power sources readily available in most facilities.

 The HFCB control box is hardwired and standard with 230 v / 1 phase / 3 phase output power. When UL / CUL approval is required, the HFC1 3 phase, hard-wired or Smart Start™ HFC1 3 phase control boxes are options. Both models may be integrated with existing PLC systems.

 The Speed-Commander™ 1400 MP and Speed-Master® 1600 MP, both safely engineered with class 4 safety switches which signals the door that is verified closed. Personnel working nearby can rely on the door being in the closed position when it should be, insuring that machinery won’t operate until man and materials are out of danger. 

 The Speed-Commander™ 1400 MP and Speed-Master® 1600 MP doors work in conjunction with both large and small machinery, in any type of operation including welding and painting, providing an effective barrier between the industrial operation and personnel working in the area.

 Both the Speed-Commander™ 1400 MP and the Speed-Master® 1600 MP come in a sectional panel design. The panels are connected using horizontal aluminum profiles that allow for fast and easy panel replacement when required. 

 The model 1400 MP is perfect for areas with little or no air movement and is standard with a 58 oz. / sq. yd. reinforced PVC panel, available in yellow, orange, red, blue, and grey. An optional welding window is available. 

 Check out Overhead Door Company of Eastern New Jersey Commercial, a Division of Duraserv at 609-642-4864, or through our website at http://bit.ly/ohdnewjersey-contact-us.

The loading dock system is vital to the industrial and warehouse facilities to efficiently carry out the smooth business operation. These facilities are now flourishing in Jamesburg, New Jersey and to efficiently facilitate effective business engagement, these businesses are utilizing the advantages of these dock equipment. The loading dock system is the integration of several dock equipment such as but not limited to the high-speed rolling steel doors, dock barriers, dock shelter and seals, and dock leveler and lift. The presence of the loading dock equipment is indispensable to ensure the highest business productivity as well as the utmost safety of the personnel and security of the facility. As a result, the use of these high-technology loading dock equipment makes the workload lighter and ensures easy access to the storage areas. When a facility utilizes manual dock equipment, it should regularly set the maintenance and repair schedule to ensure their proficient functionalities. Otherwise, it would result in an expensive overhead expense for the replacement of parts. When this happens, it is highly advisable to upgrade to a high-end loading dock sets of equipment. In essence, it would be best to purchase the hydraulic equipment, which is more durable and effective compared to the old types of loading dock equipment. Few of the recommended sets of loading dock equipment are the following:

1. APS Air Bag Conversion Kit – this patented ATC Air Technology Conversion Kit will surely extend the life of your old dock leveler and make it more efficient while lowering your operating costs. It has a simple design for ease of operation and low maintenance. 2. APS Flexback Panel – The FLEX-BACK™ Panel is the ultimate answer to your common lower door panel damage that is one of the most frequent and expensive maintenance concerns in today’s busy warehouses; 3. APS Hydraulic Conversion Kit – it has an easy-to-operate feature, fully hydraulic activation is likewise available in a conversion kit.

If you are in Jamesburg, New Jersey, we strongly recommend taking advantage of the products and services of Overhead Door Company of Eastern New Jersey Commercial.

We are highly skilled professionals and we fix and replace broken loading dock equipment. We provide the best options to our clients in consideration of our clients’ complete satisfaction as we prioritize their interests.

For your needs about loading dock upgrades, equipment upgrades, APS air bag conversion kit, APS flexback panel, APS hydraulic conversion kit, loading dock upgrades Jamesburg NJ, you may visit our official website to learn more at 

http://bit.ly/ohdnewjersey

.

For your queries and other concerns, you may contact

Overhead Door Company of Eastern New Jersey Commercial

through telephone number 609-642-4864 or you may contact us via our webpage at

http://bit.ly/ohdnewjersey-contact-us

.

You may also send your service request through

http://bit.ly/ohdnewjersey-service-request

.

Our service centers are regularly open to serve your better at the following locations New Jersey, Jamesburg, Edison, Union, Cranbury, Lakewood, and South Plainfield, NJ.

Commercial and warehouse facilities are flourishing in New Jersey. The main undertaking is taken by the warehousing aspect as the goods and commodities are subject to wholesale or retail distribution. Storage of these goods and commodities is, therefore, is an indispensable to carry out this kind of business venture. The nature of this venture is more on the delivery and transfer of the goods and commodities to and from the storage areas vis-à-vis towards the market. Meaning, the workforce is mainly one of the elements to boosts in order to increase productivity, right? That being said, the assembly and installation of the Dock System in these facilities are significant to ensure both the efficiency and productivity of the business. A loading dock is an amenity in the warehouse and other similar facilities that promote the efficient transfer of goods and commodities directly to the storage areas from the delivery trailer truck. A loading dock is just an elevated door opening in these facilities that promotes a shortcut way. The loading dock system is the integration of different equipment that each of them has a separate and distinct function that when utilized together will surely deliver a proficient and effective delivery of services. These pieces of equipment comprising but not limited to the dock barrier, shelter, high-speed door, door sealer, lift and levelers and others similar in nature. A dock leveler is one of the most important fixtures where it facilitates to bridge the gap between the hip of the loading dock and the delivery truck floor to smoothly carry out the smooth transfer of goods and services. The installation of the dock leveler is very important because it will already address the need for too much manpower for the job and the conduct of deliveries may already be carried out at the back door as not to intervene in the regular business operation in front. It is the dock leveler that is frequently been ignored not until it breaks down. Its importance is not appraised as it works just to bridge the passage of the deliveries of goods and services. To this end, the regular business undertaking may even be suspended in cases where the loading dock leveler breaks. Worse, it may even lead to an untoward accident of the personnel in the dock. To ensure its efficiency and effectiveness, there should be a need for its regular upgrade and maintenance as well as its repair. If you are in dire need to avail of the high-quality loading dock leveler and a professional installation, you may need to avail of the products and services of Overhead Door Company of Eastern New Jersey Commercial. We are experts in fixing the broken dock equipment that includes the dock leveler through the hands-on installations of our highly-skilled technicians. We believed that loading docks and similar places are dangerous places and there should be a need to carefully monitor there regular operations and performances. It is therefore important to undertake the necessary precaution to equip them with well-maintained equipment. In short, we can undertake the regular maintenance of your dock leveler and other dock equipment. For your needs about dock leveler service, dock leveler repair, dock leveler installation, loading dock leveler, loading dock equipment, dock leveler service New Jersey, and dock leveler repair Jamesburg NJ, please visit our official website to learn more at http://bit.ly/ohdnewjersey-parts-service.

  For you queries and other concerns, you may call us through telephone number 609-642-4864 or you may contact us via email through our webpage at http://bit.ly/ohdnewjersey-contact-us.