APL Apollo Pipes

PVC or Polyvinyl Chloride pipes are amongst the most widely used materials across industries for plumbing solutions. PVC pipe fittings are the specially designed products that allow for these pipes to be connected and maneuvered as needed. This article will guide you through everything you need to know to understand the world of PVC pipe fittings!

What exactly are they?

PVC pipe fittings are simply just the joints that connect two pipes together. They come in various shapes and sizes to accommodate your plumbing needs. With a variety of these, it’s become vital to understand the types of fittings so you can pick the right PVC pipe fittings manufacturer.

These pipes and pipe fittings are an integral part of plumbing in these times due to their durability, ease of installation, corrosion resistance and more! So these fittings become amongst the most important plumbing needs whenever you take on a project.

What are the types of PVC pipe fittings?

The following are the most common types of fittings. While there are a lot more than the ones mentioned below, this allows you to get a quick rundown of the most basic ones.

Elbows:

Elbows help change the direction of the pipeline. They come in various angles but the most common ones are 90 degree and 45 degree ones

Tees:

These resemble the letter T in shape - allowing us to divide a pipe flow or combine it into one. They have 3 openings - typically with one being the main pipeline and the other two serving as bifurcation lines.

Coupler:

These are amongst the most common fitting - they connect two pipes usually permanently. It can even be used to connect smaller and larger pipes. They are further divided into two kinds: Threaded and non threaded.

Caps:

As the name suggests, these are used to cap the flow at the end of  a pipeline

Unions:

Unions connect two pipes, much like couplers. But they are used in cases where the fitting needs to be easily removed - for cleaning or other purposes.

Reducers:

Reducers help connect pipes of different sizes. They make sure there’s no hiccups when connecting these varied pipes and they come in a variety of configurations.

Bushings:

Bushings also connect two pipes of different diameters but the size difference is smaller.

Valves:

These are the ones you most definitely have seen - they’re used to regulate the flow of water

How do you pick the right fitting?

Now that you know the basic fittings, picking the right one is next. There are a variety of factors to consider when choosing the fittings:

Size: Most importantly, you have to pick the right size for your needs. PVC pipe fittings follow a slightly different size guide which needs to be taken into account before purchasing. Fittings follow the Nominal Pipe Size (NPS) System.

Pressure: Different pipe connections would need different pressure levels. While choosing the fitting, ensure that it can handle the pressure of the system

Use: Depending on the application, different fittings are needed as we saw above.

Pipe fittings are an integral part of your plumbing system so make sure you choose wisely. Choose quality products from trusted PVC fittings manufacturers like APL Apollo. Built to last, these fittings make sure your plumbing systems are strong and secure in every joint.

Follow us on:

Facebook: https://www.facebook.com/APLAPOLLO

YouTube: https://www.youtube.com/channel/UC_VuCZ7Nr4VsfoS81V063Ig?view_as=subscriber

Instagram: https://www.instagram.com/apl_apollo/

Twitter: https://twitter.com/ApolloPipes

LinkedIn: https://in.linkedin.com/company/apollo-pipes-ltd

APL APOLLO is dedicated to providing our customers with an appropriate solution. Everybody wants to improve their bathroom and make it more aesthetically pleasing and useful. APL APOLLO offers a large assortment of premium bathroom accessories. Both the functionality and beauty of the bathroom are greatly enhanced by these bathroom accessories.

In plumbing systems, PVC pipe fittings are essential because they guarantee correct connections and flow control. PVC pipes and fittings offer numerous benefits over more traditional materials like concrete and metal. PVC pipes are available in a range of pressure ratings to accommodate a variety of uses, including high-pressure industrial processes and low-pressure water supplies.

For more than 40 years, APL Apollo Pipes has been a reputable and popular pipe brand in India. Numerous PVC pipe types, including CPVC, UPVC, SWR, column, casing, and agricultural PVC pipes, are available from APL Apollo. APL Apollo's PVC products are the most appropriate when selecting PVC pipes for your needs. The newest technology is used in the design and manufacturing of these pipes in order to meet the diverse needs of the clients.

High-Density Polyethylene (HDPE) has revolutionized the way that water and other fluids are transported in the current plumbing and construction industries.

Why are HDPE Pipe Fittings Better?

HDPE pipe fittings have benefits over materials such as metal or PVC. The fittings are made to work well with HDPE pipes, which form a system that is durable and reliable.

The most important advantages are:

Corrosion Resistance

Flexibility and Impact Resistance

Leak-Proof Connections

Long Service Life

Types of HDPE Pipe Fittings

The versatility of HDPE systems comes from having such a wide variety of fittings available:

Couplers and Joiners: Easily connect straight pipe sections together.

Tees and Eyes: It makes branch connections in your piping system.

Reducers: It enables transition between various pipe diameters.

End Caps: It closes the end of pipes securely.

HDPE Coil Pipe: It is very flexible.

HDPE coil pipe is one of the most convenient forms this material comes in. Supplied in a single continuous length, it minimizes the need for joints and connections. This makes it ideal for applications that require extended, uninterrupted pipelines, such as:  

Water main supply

Farm irrigation

Ground source heating schemes

Gas distribution systems

HDPE coil pipe is flexible enough to track contours of the ground and run around obstacles without extra fittings, resulting in saving both cost and time when installed.

Installation Aspects for HDPE Fittings and Pipes

Proper installation is crucial when working with HDPE (High-Density Polyethylene) pipes and fittings because it directly impacts the long-term performance, safety, and durability of the entire piping system. Unlike rigid materials, HDPE pipes are flexible and require precise alignment and secure jointing.

Fusion Welding: The most robust connections are formed by heat fusion, with pipe and fitting melting together at the molecular level

Mechanical Connections: For temporary installations or connections to other materials

Support Requirements: Although flexible, HDPE systems still require proper support at intervals.

Conclusion

When selecting HDPE pipes and fittings for your next project, you can choose brands like APL Apollo as they stand as a trusted industry leader. Their comprehensive range includes precisely engineered components manufactured to the highest standards.

Available Sizes: Fittings and pipes are offered in 20 mm to 315 mm in PE 63, PE 80, and PE 100 according to IS 4984 & 14333 to be compatible with nearly any application.

Follow us on:

Facebook: https://www.facebook.com/APLAPOLLO

YouTube: https://www.youtube.com/channel/UC_VuCZ7Nr4VsfoS81V063Ig?view_as=subscriber

Instagram: https://www.instagram.com/apl_apollo/

Twitter: https://twitter.com/ApolloPipes

LinkedIn: https://in.linkedin.com/company/apollo-pipes-ltd

With so many products available in the market, choosing the best quality water tank may get confusing. This blog will guide you through the necessary factors to look for when selecting the ideal water tank for your requirements.

Material

The first to consider when choosing the best water tank is the material. Top water tank manufacturers provide several options.

Polyethylene (Plastic): Light, cheap, and resistant to corrosion and rust.

Stainless Steel: Strong, sanitary, and appropriate for storing drinking water.

Concrete: Comes with superior insulation capabilities.

Fiberglass: Light yet strong, and providing good UV resistance.

Every material has its own strengths, but polyethylene tanks are now widely used because they are durable, economical, and easy to install.

Size Considerations

Choosing the right tank size is quite important. Consider your daily usage, available space, and your budget. In residential use, 500-2000 liters are common sizes, while for commercial buildings, 3000 liters and above may be used. The high-quality water tank providers provide several sizes to cover all requirements.

Location and Installation

Where you install your tank matters a lot. You can install it in the following places according to your needs.

Rooftop: It demands light weight tanks and structural evaluation

Underground: It requires tanks that are soil pressure-resistant.

Above-ground: Most common and easy to install.

Quality Indicators

While buying water tanks, check for these quality indicators:

Food-grade materials: It maintains water safe to drink and also for other purposes.

UV stabilization: Prevents algae growth and material deterioration.

Warranty period: Longer warranties are usually an indicator of higher quality.

ISI marks or appropriate certifications: Indicates compliance with industry standards.

Maintenance Requirements

The ideal quality water tank must be easy to maintain. Check for the following features:

The interior surfaces of the tank are smooth, which prevents the growth of algae.

The design is easy to clean and includes adequate access points for maintenance.

The tank is properly sealed to avoid any risk of contamination.

The material used in the tank has anti-bacterial properties to ensure hygiene.

Cost vs. Value

Investing in a good quality tank from a well-known manufacturer generally proves to be cost-effective in the long run. Better quality tanks provide longer lifespan, improved preservation of water quality, lower maintenance expenses, and less frequent replacement.

Conclusion

You can choose a reputed brand like APL Apollo, which is one of the best when it comes to the highest quality water storage solutions with innovative products. With a large array of water storage solutions to meet various requirements for residential and commercial use, they are among the best manufacturers around.

APL Apollo provides an extensive range of tank sizes to meet all requirements:

500 Ltr (suitable for small families)

700 Ltr, 1000 Ltr (suitable for medium families)

1500 Ltr, 2000 Ltr (ideal for bigger houses)

3000 Ltr, 5000 Ltr (ideal for commercial buildings)

7500 Ltr & 10000 Ltr (ideal for industrial use)

Their tanks come in various colors such as White, Black, Yellow, Green, and Blue, enabling customers to select options that match the beauty of their property.

Follow us on:

Facebook: https://www.facebook.com/APLAPOLLO

YouTube: https://www.youtube.com/channel/UC_VuCZ7Nr4VsfoS81V063Ig?view_as=subscriber

Instagram: https://www.instagram.com/apl_apollo/

Twitter: https://twitter.com/ApolloPipes

LinkedIn: https://in.linkedin.com/company/apollo-pipes-ltd

APL Apollo water tanks are perfect for drinking water because they are made of food-grade plastic. The water is safe, pure, and healthy due to the tanks' multilayer protection and complete bacterial resistance. Additionally, they offer complete UV stabilisation. The sizes of APL Apollo Water Tanks range from 500 to 10,000 litres.

APL Apollo Pipes manufactures a wide selection of HDPE pipes that meet numerous national and international standards. These pipes, made with cutting-edge technology, are lightweight, robust, long-lasting, maintenance-free, and flexible because of their natural flexibility. Because of their strong flexural and impact strength, these pipes are durable.

APL Apollo SWR pipe fittings provide a dependable alternative to other conventional pipes. Depending on their performance and quality, our SWR pipes can distribute both hot and cold potable water. The SWR drainage system is extremely lightweight and therefore ideal for outdoor use. As such, it can be easily implemented in a range of settings, such as residences, workplaces, hotels, schools, and swimming pools.

As a material, PVC is reasonably flexible, long-lasting, and resistant to a wide range of challenging working circumstances, including soil, water pressure, chemicals, wastewater, and water. Because PVC is a plastic, it resists rust, corrosion, and weathering. APL Apollo PVC pipes and fittings are available in an wide range of class and pressure ratings, as well as a broad selection of diameters. We have the best piping systems, despite the application.

UPVC plumbing damage can be an expensive affair. Even minor issues can spiral into a financial nightmare. Hence, it is important to know about the common problems you may face while using UPVC plumbing pipes. Here are a few simple but effective measures that will prevent you from incurring hefty repair and water damage costs.

1. Leaking Joints

One of the frequent issues with UPVC pipes is leakage. It mostly happens as a result of improperly sealed joints or aging joints.

Solution: Start by giving the area a thorough cleaning before applying new pipe cement or sealant made especially for UPVC plumbing fittings. In severe cases, you might have to take the fitting out and replace it entirely. When connecting new joints, always make sure you're doing it according to the manufacturer's instructions.

2. Cracked Pipes

Cracks can develop in UPVC pipes due to temperature changes, faulty installation, or excessive pressure.

Solution: You can get temporary relief for small cracks using specialized pipe repair epoxy. But for permanent results, it is better to replace the damaged section with new UPVC plumbing pipes and fittings. Ensure that you stop the water supply before repairing.

3. Discoloration

The UPVC pipes can develop a yellowish appearance due to long-term exposure to sunlight or some chemicals in the air.

Solution: Although discoloration will normally not affect the functioning of pipes, you can insulate them so as to prevent exposure to sunlight. Alternatively, use UV resistant paint to cover the exposed pipes. For aesthetics within the house, discolored sections can be covered using pipe covers.

4. Noise in Pipes

The knocking or rattling sound coming from your UPVC plumbing pipes might signify that they are not firmly secured.

Solution: For loose pipes, add additional pipe clips or pipe supports to secure them. Using rubber-lined clips can help reduce the vibration noise.

5. Frozen Pipes

In extremely cold weather, UPVC pipes can sometimes freeze.

Solution: Insulation should be applied on exposed pipes. In case of freezing, avoid open flames as much as possible; rather, use a hair dryer or warm towels and apply it to gradually release the frozen portion.

Conclusion

Choosing high grade material is the first step to prevent plumbing issues. Hence it is essential to invest in a quality plumbing solution like APL Apollo. They manufacture various types of top-grade UPVC plumbing pipes and fittings for construction, which have been engineered to withstand most of the common problems through superior manufacturing standards and quality materials.

APL Apollo is a brand that offers comprehensive ranges to fulfill all plumbing requirements, including SCH-40 pipes from ½" to 4", along with SCH-80 pipes from ½" to 4". Their fittings collection includes SCH-80 fittings as per ASTM D-2467 (1.5" to 2") and SCH-40 fittings as per ASTM D-2466 (2.5" to 4"), ensuring compatibility and compliance with international standards for every plumbing project you undertake.

Follow us on:

Facebook: https://www.facebook.com/APLAPOLLO

YouTube: https://www.youtube.com/channel/UC_VuCZ7Nr4VsfoS81V063Ig?view_as=subscriber

Instagram: https://www.instagram.com/apl_apollo/

Twitter: https://twitter.com/ApolloPipes

LinkedIn: https://in.linkedin.com/company/apollo-pipes-ltd

CPVC is an advanced thermoplastic material made with chlorinating standard PVC resin. This chlorination process grants CPVC unique enhanced properties that make it fit for distributing hot and cold water. A complete CPVC plumbing system has pipes, valves, and CPVC plumbing fittings, which are designed to work together efficiently.

Benefits of CPVC

Here’s why CPVC pipes are a preferred choice for modern plumbing systems:

High Temperature Resistance

One of the major advantages of CPVC would have to be its ability to withstand high temperatures compared to standard PVC. While PVC begins to soften at about 140°F, CPVC can take temperatures up to 200°F, thus being well suited for hot water use.

Resistant to Corrosion

CPVC does not rust easily by common chemicals present in municipal water supplies, unlike metal pipes that might corrode after some years. This means the water remains clean, free of microbes and ensures a longer service life for your plumbing.

Easy to Install

CPVC piping systems are light and can easily be cut with just basic tools. The cementing process of joining them creates a molecular bond between the components, which results in no leakage.

Economical

CPVC is also an inexpensive alternative among other piping systems, particularly when it comes to installation. The low material cost, reduced labor requirements, and minimal maintenance make it an ideal choice for projects with a limited budget.

Choosing The Right CPVC System Specifications

Here are a few points you should consider before selecting CPVC systems to ensure optimal performance.

Pipe Schedule and SDR Ratings

The Schedule (SCH) or Standard Dimension Ratio (SDR) of CPVC pipes indicates their thickness related to diameter. A lower SDR means a thicker wall with a higher pressure rating.

- SDR 11 pipes are excellent in withstanding pressure for residential uses.

- SDR 13.5 best balances both pressure and resistance requirements for general plumbing work.

- SCH 40 and SCH 80 - These designs typically apply to larger diameter pipes intended for higher pressure applications.

Size Considerations

The right size ensures adequate water flow and pressure through the system. If the pipes get undersized, the pressure might drop and may result in water flow problems. On the other hand, oversized pipes lead to unnecessary material costs and inefficient system design.

Installation of CPVC plumbing systems

Utilize the relevant solvent cement specifically made for CPVC.

Adhere strictly to manufacturer instructions while curing and prior to pressure testing.

Conclusion

APL Apollo offers end-to-end solutions for CPVC systems that conform to quality standards. With superior chemical resistance and durability for long life, CPVC systems designed by APL Apollo deliver an outstanding performance, whether used in residential or commercial applications.

Their CPVC plumbing fittings are tested for compatibility without any leakage at connections. They have a wide range of CPVC pipe and plumbing solution like:

SDR 11 - ½" (15 MM) TO 2" (50 MM)

SDR 13.5 - ½" (15 MM) TO 2" (50 MM)

SCH 40 - 2 ½" (65 MM) TO 4" (100 MM)

SCH 80 - 2 ½" (65 MM) TO 4" (100 MM)

FITTINGS:

SDR 11 - ½" (15MM) TO 2" (50MM)

SCH 40 - 2 ½" (65MM) TO 4" (100 MM)

This wide range ensures that APL Apollo has the right CPVC option for you with a reliable and performing long-term solution.

Follow us on:

Facebook: https://www.facebook.com/APLAPOLLO

YouTube: https://www.youtube.com/channel/UC_VuCZ7Nr4VsfoS81V063Ig?view_as=subscriber

Instagram: https://www.instagram.com/apl_apollo/

Twitter: https://twitter.com/ApolloPipes

LinkedIn: https://in.linkedin.com/company/apollo-pipes-ltd

Water conservation is one of the most important advantages of sprinkler irrigation systems. Water waste is decreased by the uniform distribution of water provided by these systems. All types of irrigable soil can be used with APL Apollo sprinklers, which combine quality, affordability, and convenience of use to provide great coverage for both small and big areas.

Modern technology is used in the manufacturing of APL Apollo showers, guaranteeing a high-end bathing experience at a reasonable cost. APL Apollo provides a selection of premium bathroom showers in a variety of styles and colours, all of which are tailored to your preferred style.

PVC pipes are flexible, reasonably priced, and resistant to all weather conditions. APL Apollo offers a large selection of PVC pipes, including column pipes, casing pipes, SWR pipes, UPVC pipes, CPVC pipes, and more. The newest technology is used in the design and manufacturing of these pipes in order to meet the diverse needs of the clients.

The APL Apollo PPR Plumbing System is prepared using premium PPR material. It is launched into the market following extensive study, testing, and the use of state-of-the-art technology. APL Apollo's products are renowned for their dependability, affordability, and quality. Building plumbing systems and industrial piping systems benefit greatly from the APL Apollo PPR piping system's ability to withstand temperatures between -20°C and 95°C.

Using the proper PVC pipe fittings is crucial when applying plumbing materials in order to maximize their durability and functionality. Whether you are utilizing them for home plumbing, or commercial plumbing,  the right fitting is always crucial!

Consider the Application First

Prior to buying any fitting, you need to consider what the plumbing system will be used for. Various applications necessitate various kinds of fittings:

Water supply systems usually require fittings other than drainage systems.

Outdoor uses need UV-resistant fittings.

Chemical transport systems require specially crafted fittings.

Quality Matters

All products are not equal. Responsible PVC pipe fitting manufacturers comply with high standards of quality so that their products are pressure-resistant and can meet environmental conditions. You must look for manufacturers complying with international standards and offering quality certifications for products like APL Apollo.

Material Difference Understanding

Understand the material differences between CPVC and UPVC, as well as why CPVC is preferable for residential, commercial, and government installations.

UPVC (Unplasticised PVC) fittings are hard and are generally meant for cold water usage. CPVC (Chlorinated PVC) fittings have heat resistance and can be suitable for hot water systems.

Size and Compatibility

It is important to use the right size and compatibility with already installed pipes. You should:

Carefully measure existing pipes.

Check the pressure rating for compatibility.

Make sure that the fittings are compatible with the material of the pipe.

Installation Requirements

Various fittings demand different means of installation:

CPVC, due to its superior flexibility and heat resistance, may require specific fittings and cements, although UPVC can frequently utilize regular PVC fittings and glues.

Some require solvent cement.

Some can make use of rubber seals.

Push-fit options need no adhesives.

Cost Considerations

Though it may be enticing to go for cheaper options, you should look at overall costs in the long run:

Elevated quality fittings will last longer.

Top quality fittings usually seal better.

Repair costs from faulty fittings usually outweigh the difference in price of quality products.

Conclusion

For quality UPVC CPVC pipe fittings, APL Apollo provides solutions that provide strong, leak-free joints across different plumbing applications. The pipes offer superior bonding properties, such that pipe systems are guaranteed for reliability and durability.

By paying attention to these factors, you can choose proper fittings for any plumbing task, and ultimately save time and money.

Follow us on:

Facebook: https://www.facebook.com/APLAPOLLO

YouTube: https://www.youtube.com/channel/UC_VuCZ7Nr4VsfoS81V063Ig?view_as=subscriber

Instagram: https://www.instagram.com/apl_apollo/

Twitter: https://twitter.com/ApolloPipes

LinkedIn: https://in.linkedin.com/company/apollo-pipes-ltd