How to make a hookah
1. Materials and tools needed: a 350ml mineral water bottle, too large to hold; a piece of plastic hose; scissors and a wallpaper knife. 2. First cut the plastic hose into two sections that are slightly longer than the bottle body. 3. Then use a wallpaper knife to cut two round holes in the bottle cap. Note that the diameter of the round hole is slightly smallerĀ Custom Hookah than the diameter of the plastic hose, and the plastic tube can be plugged in with force to ensure air tightness. Be sure to wear gloves when using the wallpaper knife, otherwise it is easy to scratch your hands! Safe use of tools is an important skill. In actual operation, you can use a wallpaper knife to unscrew a small hole, and then use chopsticks and other cylinders to stretch in and expand with force, so as to avoid accidentally opening the mouth very wide when using the knife. 4. Firmly plug the two sections of plastic hose into the bottle until it reaches the following position. 5. Fill more than half of the bottle of water, and a hookah is ready. When inhaling from one side of the hose with the mouth, the air pressure of the cavity in the bottle decreases. Under the action of atmospheric pressure, the air enters from the hose containing the cigarette, and is filtered by the clean water in the bottle, and finally sucked into the human mouth. .
