Brighton UK 2019 π¬π§ Van update: Midi Heki is now in! The neat parallel lines drawn on the roof turned into jagged and wonky cuts as the power saw ate through the tin roof. A bit of angle grinding was needed to widen some areas, it was not a pretty job. Eventually the roof vent fitted, so I painted the edges of the hole to stop it rusting, about three coats did the trick, the last two probably overkill as I was not taking any chances. I applied the sikafix, put the roof vent in for the last time and rigged up a couple of wood planks on the top of the opening and tied them to three gas bottles raised just above the floor. This I hoped would be sufficient weight on the top of the roof vent to hold it in place until the sikafix set. I then screwed the attachment brackets into the vent and the wooden brackets, and broke two screw heads in the process, had to improvise with some washers to get the whole thing secure. All set now and has not leaked yet. Does let a nice amount of natural light in to the back of the van. #transitcustomcamper #transitcustom #camperconversion #campervanconversion #selfbuildcamper #selfbuildcampervan #vanbuild #vanlifecamper #vanproject #campervanconversions (at Brighton) https://www.instagram.com/p/BzEHRSwHpwV/?igshid=1vgztqyzqmrqd