http://guventeknikmakina.com/en/gt703... -Effective forming area 700×500 mm. -SEW brand Servo plug assist. -Mold forming depth 150 mm. -SEW Eurodrive brand Servo main engine 11 kw ( 31 Nm,3000 rpm ) -SEW-Eurodrive brand Servo Plug Assist Motor 7.5 kw ( 25.5 Nm, 3000 rpm ), ( with automatic lubrication) -SEW Eurodrive brand unwinder (AC) motor 0.75kw ( 89 Nm, 1435 rpm ) -SEW Eurodrive brand cutting (AC) motor 1.5 kw ( 22 Nm , 2830 rpm ) -SEW Eurodrive brand waste roller ( AC)motor.0.75 kw (50 Nm ,940 rpm ) -SEW Eurodrive brand chain pulling engine 4 kw.( 9.40 Nm,4500 rpm ) -Becker Brand Vacuum Pump 1.5 kw. -Material wideness adjusttment according to plate dimension(max 730 mm). -Stainless Steel Raw material chain levers with upper and lower side cooling abilities -Chain roads that tightens the plate automatically when machine is turned on. -16 area controlled upper pan heat controlling. -3 area controlled lower pan heat controlling. -Ceramics heaters. -Heating pan movement by pneumatic piston. -Heat saving plates on sides of heating pans. -Sheet hanging controller laser sensors. -10 year warranty for machine cam. -Electric-powered central central greasing. -Shock absorbers to absorb the vibrations mowing lower block. -Automatic water router temperature controller for upper and lower moulds. -Automatic cutting adjustment for upper mould. -Safety valves and indicator for machine inflow air pressure. -Safety valves and indicator for machine inlet water . -Forming air pressure indicator. -SMC brand pinaumatic valves. -Feeding unit ( max capasity : 120 cm Ø ). -Pressing air pressure setting and indicator -Full automatic operation -Complete heat controlling when machine is in stand-by position -Motor-Driven water canalizing that adjusts automatically the heat differance between lower and upper moulds with PLC controlling -On-screen heat difference indicator -Quick assembling-dissembling mechanism in lower -Mould water connection -Panel type heat meter to read return water heat -SMC brand grease-free operating pneumatic valves -Coil feed unit with 500 kg maximum capacity . -Tft colour touch-screen -Turkish-English language option,programming with voice -Printer configured usb connection -Air conditioner for the electricty board -Lubrication system for serwo plug -Elongation system for chain. -All servo and AC motors ,drivers and reductors are SEW Eurodrive brand, new generation , %20 high efficiency. -All used motors used on machine has IEC 60034-30 standarts accepted by CEMEP'' (Electrical Machinery and Power EUROPEAN MANUFACTURERS ASSOCIATION. -All valves are Japan SMC brand. -Long life for the chains by new design chain lubrication system. -High efficiency with out preheater ( Increased SSR pcies and developed heating pans )
