#srx device

Configure Time and NTP Client in SRX Device

Configure Time and NTP Client in SRX Device,how to set the system time of an SRX Series device manually and configure Network Time Protocol (NTP) on the device. J-Web Configuration To set the time zone for the device: Select Configure>System Properties>Date Time. Click Edit. In the Timezone list, select the appropriate time zone. For example, Europe/Berlin. Click OK. To manually set the system…

Configure DHCP Server in SRX Device

Configure DHCP Server in SRX Device describes how to configure an SRX Series device as a DHCP server and how to verify and troubleshoot your configuration.Configure an SRX Series device as a DHCP server for a subnet. Note: An SRX Series device can act as a DHCP client, DHCP server, and DHCP relay agent at the same time, but you cannot configure more than one DHCP role on a single interface. J-Web…

Configure Custom Virtual Router in SRX Device

Configure Custom Virtual Router in SRX Device.In Junos Software, a virtual router is a type of routing instance, which is a collection of routing tables, interfaces, and routing option settings. To establish a virtual router, you do the following: Create a virtual router Assign an interface to a virtual router (if not inet.0). Assign an interface to a zone. Note: Binding interfaces to zones is…

Configure Ethernet ports for switching in SRX Device

Configure Ethernet ports for switching in SRX Device.This article provides examples of how to configure Ethernet ports for switching and information about how to verify and troubleshoot your configuration.The SRX Series products provide a comprehensive suite of Ethernet switching functionality. Ethernet switching features eliminate the need for Layer 2 switches in small branch offices and act as…

Configure J-Flow in SRX Device

Configure J-Flow in SRX Device. Configuration example for J-Flow versions 5 and 8: The following procedure provides an example of the J-Flow configuration for versions 5 and 8 (this procedure should also work with NetFlow versions 5 and 8): Enable sampling on one or more interfaces and specify the direction: user@host# set interfaces ge-0/0/0 unit 0 family inet sampling input user@host# set…