#rc10b74

Factory Team is excited to announce the Lightweight Center Driveline kit for the RC10B74 series of vehicles. This driveline kit reduces the rotational mass of the center driveline by a total of 19.3g over the standard steel parts! Durability and longevity were addressed with the use of plastic blades that act as the contact surface between the dog bone pins and outdrives to reduce wear and tear.

This kit is intended for use in the 13.5T Spec class with the combination of a center differential and is not recommended for modified racing or with the use of a slipper clutch.

Available now. (Pictured: #92372 RC10B74.2 FT Lightweight Center Driveline Kit)

Team Associated is proud to launch a new offset front wheel for the B74.2 4WD buggy platform. The +1.5mm 1:10 scale 2." wheel is the optimal width for carpet racing where the low-profile tires allow for added track width. The team also prefers to run the new offset for dirt racing, with setups by Spencer Rivkin, Dustin Evans, and Aydin Horne using this offset. Fits all B74.2, all B74.1, all B74.

Available: now. (Pictured: #92363 4WD Front Wheels, 2.2", 12mm hex, +1.5mm, fluorescent yellow.)

New from Factory Team are LTC (low torque capacity) gear sets for the RC10B74 series buggies. Available in metal and plastic variants, these gear sets increase the drivability and traction of the Team Associated B74. The new design of high tooth count and smaller teeth allows for smoother differential action that won't lock on power. These gear sets come with the gears and shims needed for one differential.

Available now. (Pictured: #92306 RC10B74 FT LTC Differential Rebuild Set, metal.)

#92255 RC10B74 G10 Chassis Brace Support Set, 2mm (photo above). #92137 Shims, 5.1x8.0x0.20mm (photo below).

More: https://bit.ly/3aVIabJ

The off-road RC car racing scene has changed over the past few years, with turf and carpet racing becoming more popular and grip levels at an all-time high. The engineers inside Team Associated's Area 51 were quick to answer the 4WD class with the RC10B74 Team Kit, a completely new chassis configuration equipped with a long list of features designed to give you the winning edge. (Pictured: #90027 RC10B74.1 Team Kit.)

The new #92262 Differential Outdrives are an updated version of the original #92136 RC10B74 front or rear outdrives. They feature less machining work to provide a more durable and economical outdrive. Their length is 1mm shorter than the original outdrives to reduce chipping around the edges.  

The #92272 RC10B74 Steering Block Arms are a new and stronger design for the RC10B74 buggy. Keeping the original steering geometry, the 2.5mm carbon fiber parts have a larger cross section and radii that greatly improves durability. The steering stop area has been modified to allow for the popular racer modification of grinding the plastic steering stop for additional throw on tight tracks.

The Factory Team M4 Low Profile Wheel Nut is designed to fit on the front of car models (example: B74, B64, TLR 22, TLR 22-4, Tekno EB410, Yokomo YZ-4 SF) that require a thin nut to maintain the legal width limit at major events. With large-diameter locking serrations, these wheel nuts "bite" into the face of the wheel to create a secure hold.

Many Factory Team parts for the RC10B74 are in stock and shipping! Use these special parts to tune your ride and try out various podium-busting setup possibilities. (Pictured above: #92144 RC10B74 Differential Set, center.)