Recreate beautiful hallway mirror LED light with a motion sensor switch. This tutorial will provide you with all of the LED accessories you need.
This project is two systems, the first is a 24v system using 24V 240ohm LED Strips, 18AWG in-wall rated cable, a motion sensor, and a 24v 3.75A plug-in power supply. The second system is a 12v RGB system highlighting the custom glass table top, using a 12v RGB flexible LED strip, 18AWG in-wall rated 4-conductor cable, RF RGB remote controller, and a 12v 2A plug-in power supply. We do not stock our RGB Mirror LED Light strips on our website, if you are interested in an RGB system call us at 480-941-4286 or email [email protected] with your project details.
Measuring the available space for the LED Strips:
The 24V white LED system has a few different places where we installed the LED strips. First we measured out the perimeter of the mirror to run an LED on the outside of the mirror. This unit also had two large rectangles sandblasted on the left and right side running length wise of the mirror. This allowed us to run two vertical LED strips in each rectangle. Like the last project we installed the LED tape into an aluminum extrusion and installed that on the back of the mirror the length of the sand blasted portion of the mirror.
You can also find us on the map: https://www.google.com/maps?cid=9146440743450455000
Follow Us on Facebook https://www.facebook.com/inspiredLED/
Inspired LED 1702 W 10th Pl, Tempe, AZ 85281 Phone: (480) 941-4286











