#lacing

Starting with the default clothes for Tav. Yes, they know how to lace their shirt. Good job. This particular Tav is Durge, so it's good to know he didn't forget how when his brain got Swiss'd. However, it's not perfectly consistent because on the bottom 2 sets of eyelets he threads from the outside, but the third set he threads from the inside. Though this is probably intentional so the lacing doesn't hang on the inside of his shirt, so 9/10.

Astarion, baby boy, you were so close. But unfortunately there are two pairs of eyelets where he threads one side from the outside and one from the inside. For someone who wants to appear so put together, you think he could take the two extra braincells to lace his shirt consistently. 7/10.

Threaded consistently the whole way through...with one side. Why didn't you finish lacing your shirt? Why even lace one side if you weren't going to lace the other? Why isn't the lacing that you didn't finish shorter than the one that you did finish? All questions I can't answer because I cannot ask. 7/10 at least it's consistent.

I couldn't get a good in game screenshot of Karlach since her lacing is on her pants, but I found a texture rip so I can work with it. So the lacing here is the same all the way through, super consistent, *mwah*, but...it's sneakily unnecessarily complicated. Typically, the lacing that laces from the inside to outside would sit on top, but it's not that way on her pants. She pulls the lacing through the eyelet, then threads it under the other part of the cross, then threads it through the top of the next eyelet. And with as much lacing as her pants have, this must have taken forever for no extra benefit. It would have been easier to let it sit on top. 8/10 its pretty though.

Halsin. Beautiful. Gorgeous. I choose to believe the knots are hidden on the inside. No other notes. 10/10.

I've never actually recruited Minthara so I took a picture from the BG3 wiki. Just like Halsin, beautiful. Again, I choose to believe the ends are hidden on the inside. 10/10.

Jaheira's pants lace the same way Halsin's shirt does: perfectly. Though if the knot is hidden on the inside, I feel like that would be more uncomfortable, so I'm gonna headcannon that it ties at her waist under her shirt. Other than that, 10/10.

Minsc's shirt uses the same model as Wyll's so everything I said there applies here, though I feel like it makes more sense for Minsc. My real gripe here is that Minsc is a liar. Talking 'bout some thrice laced pants, but I didn't see any lacing on those pants. How dare he trick me in this way. 6/10 I don't like being lied to.

Yenna's mom may be dead, but she made sure her baby knew how to lace her shirt before she did. She may have gotten kidnapped by Orin, but she looked put together while doing it. Perfect 10/10. She deserves it after what she went through.

After being dead for 100 years, Isobel didn't forget how to lace her armor. Gotta be put together to see her girlfriend again. 10/10 Isobel can do no wrong.

Volo...I don't know what you've done to the front of your pants but it doesn't look good. Some of those crosses are missing. It looks sloppy. What is this. This is something I would do as a joke to see if anyone noticed. Well I noticed and I hate it. 2/10 it keeps your pants closed I guess.

That's it for the camp. I'll link other sets of characters below as I do them.

first i’ll give you a look at the pieces and measurements:

most of the seams are sewn in this picture and one half is turned inside out, allowing you to see both the finished dimensions (right) and the placement of the fusible horsehair canvas that gives this lil scrap of linen any structure at all (left)

to get your chest measurement, you’re gonna have to do some math:

first measure above and below what you want to bind. average these numbers. mine are something like 32 and 34, which average to 33. subtract a few inches--this is to allow the air movement between the laces at center front and back, critical in the summertime. i deleted 3 inches bc i like that number but you can go bigger if you want. the more inches you subtract here, the more youll be able to ratchet all your chest material down later, but at the same time you need to leave enough fabric for a sturdy garment. let’s say a range of 2-6 inches/5-15cm. by taking your measurements this way, you’re essentially measuring the chest you would like to have. that + the horsehair canvas work together to compress any squishy tissue/force anything that doesnt compress up and to the outside (basically into the armpit/lower shoulder--the chest might stick out but it will give a very puffed chest captain america pectoral silhouette)

you can also see how ive clipped my curves and pre-drilled my lacing holes. i used the marlin spike on my knife to open up the holes on the interfacing side, mainly as a way of marking them. this worked well bc the interfacing’s glue kept the linen from raveling

this is the same stage but looking at the non-interfaced grey linen/cotton blend (the black is some 100% linen from my cabbage stash). you can see ive broken the solar-plexus-to-back measurement up into a bunch of pieces to save on fabric but that’s not necessary. my original pattern was just two pieces (front and back) and chopping the straps into thirds on both sides was aesthetic

in the following picture you can really see how this is really just overgrown regency stays:

i thought about doing side lacing but didn’t think that would be comfortable for me. on the front, the side seam allowance was pressed inwards before turning to create a finished looking slot. on the back the side seam is left unfinished with an extra wide seam allowance, and is inserted into that slot.

here’s a closeup on it pinned in place (you can adjust the angle of the side seam and the fit during this pinning stage):

that side seam was just topstitched in place once i had the fit how i liked it, and the armhole was reinforced with more topstitching

alright, time for eyelets: first, you can see how well the marking worked:

next, two rows of basted eyelets (left), one row of eyelets sewn with a doubled and waxed cotton thread (center right), and one row of eyelets opened and stainless steel rings placed (right).

next time i’m going to mark the eyelets same as i did above, but do this step differently--i’ll mark and baste the steel rings in place BEFORE widening the eyelets. this is bc i had a lot of problems keeping the eyelets on center

eyelets half done on this one! on the left are eyelets sewn with doubled and waxed cotton thread and on the right eyelets sewn with quadrupled and waxed thread. the center is basting again. i was able to force the holes back in line while sewing the eyelets but it was kinda annoying. adding a second picture that doesnt have great focus but hopefully shows how that process worked and shows the spike clearly

i ended up using this white cotton thread because it’s stronger than my black cotton thread (which the rest of it is sewn with). [eta: after this was first posted, i pressed the whole thing heavily, which effectively de-waxed the thread, and i dyed the whole thing a medium charcoal grey, the thread blends in perfectly on the lighter side and isn’t such a sore thumb on the darker side]

bonus: the piecing layout for that little piece of strap. the whole light gray half of the binder was made from 1/2 of one of the legs i cut off some linen suit pants to make slutty camping shorts last year and i really really didn’t want to break into any of the other three halves for this garment--i have Plans for it

overall the fit of this is incredible. it DOESNT hurt my ribs which every zip-up garment ive been able to find (and it is difficult) does due to really thick elastic at the base. it doesnt aggravate my sensory issues with the synthetic fibers that every commercial option is made of. i can walk up a hill or stairs, or go to pt, without getting too out of breath. i can eat with it tight, or loosen the front easily and without taking it off to make eating easier and less nausea-inducing. it is reversible!

best of all the lacing at the back gives the garment enough movement for me to get it on without dislocating, and the interfacing and steel rings give it structure once it’s on. the shaping comes only from fusible horsehair linen canvas and stainless steel rings like youd use for chainmail, there’s no boning at all, which makes it very quick to sew (except the eyelets, but metal grommets would be sturdy and quick provided theyre of good quality)

there’s a small amount of gaping on the outside of the shoulder strap, which i plan on fixing with a tiny tiny dart in the armpit, i want to add pockets to tuck the laces into, and i need a better lace for the back, but it’s completely wearable in time for the 90 weather next week which is all i wanted. i’ll do a reblog when it’s perfectly finished with an update on the fit but for now it is done enough 

the little ridge where it doesnt lay flat against the shoulder is most visible with just a single t shirt over it. with a flannel or a sweater, it disappears, and by itself, it’s hidden in movement