#i2c controller ip

AXI DMA Scatter Gather

AXI DMA IP

AXI DMA Scatter Gather

I3C Basic IP (Inter-Integrated Circuit Basic Intellectual Property) is a communication protocol used for connecting different electronic components and devices within a computer or other electronic system. It is an extension of the I2C (Inter-Integrated Circuit) protocol, which is widely used for communication between various electronic components in embedded systems.

The i3C Basic IP provides several advantages over the I2C protocol, including improved performance, better power management, and greater flexibility in addressing and controlling multiple devices in a system. It supports a wider range of data rates and has a more robust error detection and correction mechanism. Additionally, i3C Basic IP supports multiple data transactions simultaneously, allowing for more efficient data transfer between devices.

The i3C Basic IP is typically used in various embedded systems, including smartphones, tablets, and other consumer electronics, as well as in automotive systems and industrial automation applications. It enables communication between various electronic components, such as sensors, displays, memory devices, and other peripherals, allowing for efficient data transfer and control within a system.

Overall, the i3C Basic IP is an important communication protocol that helps to improve the performance, power management, and flexibility of electronic systems, and enables efficient data transfer and control between different components and devices. Get to know more at

https://www.digitalblocks.com/

MIPI I3C is a scalable, medium-speed, utility, and control bus interface for connecting peripherals to an application processor, streamlining integration, and improving cost efficiencies. It gives developers unprecedented opportunities to craft innovative designs for any mobile product from smartphones, to wearable, systems in automobiles.

The I3C Slave Controller IP Core Implements Slave functionality as defined by the MIPI Alliance’s I3C Specification. The I3C bus is used for various sensors in the mobile/automotive system where an I3C Master transfers data and control information between itself and various sensor devices. The I3C Slave Controller IP Core can be easily integrated into the Sensor or Slave devices with minimal gate count.

The Master Controller for MIPI I3C IP superior performance to power ratio compared to established sensor interfaces. The rapidly increasing number of sensors creates new design challenges for mobile, automotive, and Internet of Things devices. Compliant with the MIPI I3C and legacy compatible with I2C specification, our Controller IP for MIPI I3C Master is engineered to quickly and easily integrate into any mobile embedded system on chip device and expand sensor communication capabilities with better performance and power efficiency.

 Features of I3C Slave:

●        Two-wire serial interface up to 12.5 MHz using Push-Pull

●        Legacy I2C Device co-existence on the same Bus (with some limitations)

●        I2C-like Single Data Rate messaging (SDR)

●        HDR-DDR messaging Mode

●        In-Band Interrupt and Hot-join support

●        Timing Control Asynchronous mode 0-time stamping

 Features of I3C Master:

●        Two-wire serial interface up to 12.5 MHz using Push-Pull

●        Legacy I2C Device co-existence on the same Bus (with some limitations)

●        Dynamic Addressing while supporting Static Addressing for Legacy I2C Devices

●        I2C-like SDR and HDR-DDR messaging

●        Multi-Master capability

●        In-Band Interrupt and Hot-join support

  I3C is backward compatible with many legacy I2C Devices, but I3C offers greater than 10x speed improvements, more efficient bus power management, new communication Modes, and new device roles, including an ability to change device roles over time. For more details, please visit our website at