#global section

New Post has been published on http://mocco.sk/debian-wheezy-samba-standalone-server-with-tdbsam-backend/

Debian Wheezy Samba Standalone Server With tdbsam Backend

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 05/27/2013

This tutorial explains the installation of a Samba fileserver on Debian Wheezy and how to configure it to share files over the SMB protocol as well as how to add users. Samba is configured as a standalone server, not as a domain controller. In the resulting setup, every user has his own home directory accessible via the SMB protocol and all users have a shared directory with read-/write access.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I’m using a Debian Wheezy system here with the hostname server1.example.com and the IP address 192.168.0.100.

2 Installing Samba

Connect to your server on the shell and

install the Samba packages:

apt-get install libcups2 samba samba-common

Edit the smb.conf file:

vi /etc/samba/smb.conf

In the global section, remove the “#” at the beginning of the line security = user so that it looks like this:

[...] # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. security = user [...]

This enables Linux system users to log in to the Samba server.

Close the file and restart Samba:

/etc/init.d/samba restart

3 Adding Samba Shares

Now I will add a share that is accessible by all users.

Create the directory for sharing the files and change the group to the users group:

mkdir -p /home/shares/allusers chown -R root:users /home/shares/allusers/ chmod -R ug+rwx,o+rx-w /home/shares/allusers/

At the end of the file /etc/samba/smb.conf add the following lines:

vi /etc/samba/smb.conf

[...] [allusers] comment = All Users path = /home/shares/allusers valid users = @users force group = users create mask = 0660 directory mask = 0771 writable = yes

If you want all users to be able to read and write to their home directories via Samba, add the following lines to /etc/samba/smb.conf (make sure you comment out or remove the existing [homes] section):

[...] [homes] comment = Home Directories browseable = no valid users = %S writable = yes create mask = 0700 directory mask = 0700

Now we restart Samba:

/etc/init.d/samba restart

4 Adding And Managing Users

In this example, I will add a user named tom. You can add as many users as you need in the same way, just replace the username tom with the desired username in the commands.

useradd tom -m -G users

Set a password for tom in the Linux system user database. If the user tom should not be able to log in to the Linux system, skip this step.

passwd tom

-> Enter the password for the new user.

Now add the user to the Samba user database:

smbpasswd -a tom

-> Enter the password for the new user.

Now you should be able to log in from your Windows workstation with the file explorer (address is \\192.168.0.100 or \\192.168.0.100\tom for tom‘s home directory) using the username tom and the chosen password and store files on the Linux server either in tom‘s home directory or in the public shared directory.

5 Links

New Post has been published on http://mocco.sk/ubuntu-13-04-samba-standalone-server-with-tdbsam-backend/

Ubuntu 13.04 Samba Standalone Server With tdbsam Backend

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 04/26/2013

This tutorial explains the installation of a Samba fileserver on Ubuntu 13.04 and how to configure it to share files over the SMB protocol as well as how to add users. Samba is configured as a standalone server, not as a domain controller. In the resulting setup, every user has his own home directory accessible via the SMB protocol and all users have a shared directory with read-/write access.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I’m using an Ubuntu 13.04 system here with the hostname server1.example.com and the IP address 192.168.0.100.

I’m running all the steps in this tutorial with root privileges, so make sure you’re logged in as root:

sudo su

2 Installing Samba

Connect to your server on the shell and

install the Samba packages:

apt-get install libcups2 samba samba-common

Edit the smb.conf file:

vi /etc/samba/smb.conf

In the global section, remove the “#” at the beginning of the line security = user so that it looks like this:

[...] # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. security = user [...]

This enables Linux system users to log in to the Samba server.

Close the file and restart Samba:

/etc/init.d/smbd restart

3 Adding Samba Shares

Now I will add a share that is accessible by all users.

Create the directory for sharing the files and change the group to the users group:

mkdir -p /home/shares/allusers chown -R root:users /home/shares/allusers/ chmod -R ug+rwx,o+rx-w /home/shares/allusers/

At the end of the file /etc/samba/smb.conf add the following lines:

vi /etc/samba/smb.conf

[...] [allusers] comment = All Users path = /home/shares/allusers valid users = @users force group = users create mask = 0660 directory mask = 0771 writable = yes

If you want all users to be able to read and write to their home directories via Samba, add the following lines to /etc/samba/smb.conf:

[...] [homes] comment = Home Directories browseable = no valid users = %S writable = yes create mask = 0700 directory mask = 0700

Now we restart Samba:

/etc/init.d/smbd restart

4 Adding And Managing Users

In this example, I will add a user named tom. You can add as many users as you need in the same way, just replace the username tom with the desired username in the commands.

useradd tom -m -G users

Set a password for tom in the Linux system user database. If the user tom should not be able to log in to the Linux system, skip this step.

passwd tom

-> Enter the password for the new user.

Now add the user to the Samba user database:

smbpasswd -a tom

-> Enter the password for the new user.

Now you should be able to log in from your Windows workstation with the file explorer (address is \\192.168.0.100 or \\192.168.0.100\tom for tom‘s home directory) using the username tom and the chosen password and store files on the Linux server either in tom‘s home directory or in the public shared directory.

5 Links

New Post has been published on http://mocco.sk/centos-6-4-samba-standalone-server-with-tdbsam-backend/

CentOS 6.4 Samba Standalone Server With tdbsam Backend

Version 1.0 Author: Falko Timme <ft [at] falkotimme [dot] com> Follow me on Twitter Last edited 03/14/2013

This tutorial explains the installation of a Samba fileserver on CentOS 6.4 and how to configure it to share files over the SMB protocol as well as how to add users. Samba is configured as a standalone server, not as a domain controller. In the resulting setup, every user has his own home directory accessible via the SMB protocol and all users have a shared directory with read-/write access.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

I’m using a CentOS 6.4 system here with the hostname server1.example.com and the IP address 192.168.0.100.

Please make sure that SELinux is disabled as shown in chapter 6 of this tutorial: The Perfect Server – CentOS 6.4 x86_64 (Apache2, Dovecot, ISPConfig 3)

2 Installing Samba

Connect to your server on the shell and

install the Samba packages:

yum install cups-libs samba samba-common

Edit the smb.conf file:

vi /etc/samba/smb.conf

Make sure you see the following lines in the [global] section:

[...] # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. security = user passdb backend = tdbsam [...]

This enables Linux system users to log in to the Samba server.

Then create the system startup links for Samba and start it:

chkconfig –levels 235 smb on /etc/init.d/smb start

3 Adding Samba Shares

Now I will add a share that is accessible by all users.

Create the directory for sharing the files and change the group to the users group:

mkdir -p /home/shares/allusers chown -R root:users /home/shares/allusers/ chmod -R ug+rwx,o+rx-w /home/shares/allusers/

At the end of the file /etc/samba/smb.conf add the following lines:

vi /etc/samba/smb.conf

[...] [allusers] comment = All Users path = /home/shares/allusers valid users = @users force group = users create mask = 0660 directory mask = 0771 writable = yes

If you want all users to be able to read and write to their home directories via Samba, add the following lines to /etc/samba/smb.conf (make sure you comment out or remove the other [homes] section in the smb.conf file!):

[...] [homes] comment = Home Directories browseable = no valid users = %S writable = yes create mask = 0700 directory mask = 0700

Now we restart Samba:

/etc/init.d/smb restart

4 Adding And Managing Users

In this example, I will add a user named tom. You can add as many users as you need in the same way, just replace the username tom with the desired username in the commands.

useradd tom -m -G users

Set a password for tom in the Linux system user database. If the user tom should not be able to log into the Linux system, skip this step.

passwd tom

-> Enter the password for the new user.

Now add the user to the Samba user database:

smbpasswd -a tom

-> Enter the password for the new user.

Now you should be able to log in from your Windows workstation with the file explorer (address is \\192.168.0.100 or \\192.168.0.100\tom for tom‘s home directory) using the username tom and the chosen password and store files on the Linux server either in tom‘s home directory or in the public shared directory.

5 Links