#betaflight

Setting Up Your Micro Indoor Unit with Betaflight

To configure your micro indoor unit using Betaflight, follow these essential steps to ensure your indoor drone is ready for flight:

Download Betaflight Configuration Software: Begin by downloading Betaflight, which is a widely used configuration software for micro indoor drones. This software runs on your computer or smart device, serving as the main tool for setting up and fine-tuning your drone.

Installation and Launch: After downloading Betaflight, install it on your computer or smart device. Once installed, launch the software.

Connecting Your Drone:

Connect your micro indoor drone to your computer using a USB cable. This connection is crucial for configuring the drone's settings.

In the Betaflight software, locate and select the appropriate COM port that corresponds to your aircraft.

Establishing a Connection: Click the "Connect" button within the Betaflight software to establish a connection between your computer and the micro indoor drone.

IMU Calibration:

Before you can take flight, it's essential to calibrate the Inertial Measurement Unit (IMU) of your drone.

Place the micro indoor aircraft on a flat surface in a horizontal position.

In the Betaflight software, initiate the IMU calibration process. This step ensures that your drone maintains stable flight and accurate orientation.

Configuring RC Channels:

Navigate to the RC (Radio Control) channel interface within the Betaflight software.

Set the channel arrangement to match the Frsky mode. Proper configuration of RC channels is vital to ensure your remote control can effectively communicate with your drone.

Save Your Configuration: After you've completed all the necessary configuration steps, don't forget to save your settings. Look for the "Save" option, typically located in the bottom right corner of the Betaflight interface.