#3dsurfaceetching

Etching on stainless steel can be a tricky process. Whether you just want to add texture to your steel or carve some beautiful designs on it, the technique of etching that you use will affect the result a lot. So here's the most effective etching method for stainless steel! 

Acid Etching 

The most effective method by far for etching stainless steel is acid etching. Not just stainless steel but you can use this method for other metals like brass and aluminum as well. 

Which acids to use? 

Hydrochloric acid (HCL), Sulfuric acid (H2SO4), and Nitric Acid (HNO3) are all effective for etching on steel or stainless steel. Apart from these traditional acids, other solvents can act as acids when mixed with water. There are different proportions and mixes for all these acids. 

You can use HCL directly but you need to be very careful as it can cause pitting of the steel in certain parts. 

Rather than directly using HCL, you can also form a 1:1 mixture of ferric chloride and water which will also result in the same acid differently. 

To work with Nitric Acid, it should be mixed with clear water in a ratio of 1:3 respectively. 

One can also use copper sulfate. This has to be mixed with sodium chloride (table salt) in a 1:1 ratio. This formula is mostly used for steel but works fine on stainless steel as well.